Datasheet

7
EXTERNAL USE
Step-by-Step Installation Instructions
1
Install Software and Tools
Install CodeWarrior Development
Studio for S12 V5.1 or later. CodeWarrior Dev Tools for HCS12(X)
MCUs
2
Connect the USB Cable
Connect one end of the USB cable to the PC and the other end to
the mini-B connector on the DEVKIT-S12VR board. Allow the PC to
automatically configure the USB drivers if needed.
3
Using the Example Project
The pre-loaded example project utilizes the RGB LED. Once the
board is plugged in you can see how the RGB LEDs change the
color.
4
Learn More About the S12VR
Read the release notes and documentation on the nxp.com/S12VR.
• The Processor Expert graphical initialization software included in
your CodeWarrior installation will help reduce your time to
market
• CodeWarrior for S12 with examples
In this quick start guide, you
will learn how to set up the
DEVKIT-S12VR board and
run the default exercise.