Datasheet

EXTERNAL USE

DEVKIT-MPC5744P Board : Features

• MPC5744P has 2 x 200 MHz Power Architecture® e200Z4 Dual issue

cores operating in delayed lockstep

• MPC5744P qualified to AEC-Q100 Grade 1 and ambient temperature of -40

to +125 °C

• Arduino™ UNO R3 footprint-compatible with expansion “shield” support

− Supports DEVKIT-MOTORGD motor control shield

• Integrated Open-standard Serial and Debug Adapter (OpenSDA) with

support for several industry-standard debug interfaces as well as JTAG

connector

• Easy access to the MCU I/O header pins for prototyping

• On-chip connectivity for FlexRay, CAN, LIN, UART/SCI and SPI

• Potentiometer for precise voltage and analog measurement

• One user RGB LED (1 red, 1 green, 1 blue in single package)

• 2 user push-button switches

• Flexible power supply options

• micro-B USB

• 12V External power supply

• Similar hardware across ARM

, S12 and Power Architecture

architecture

based MCUs

• Box includes:

− DEVKIT-MPC5744P Board

• Downloads includes:

− Quick Start Package

− S32 Design Studio IDE

− Application notes

• NOTE: DEVKIT-MPC5744P RevB does not support shield reset. Any

Arduino™ shield that relies on reset signal from DEVKIT-MPC5744P

RevB will not work. Shield reset is supported starting with RevC.