Datasheet

EXTERNAL USE
14
OpenSDA JTAG
JTAG
OpenSDA MCU
OpenSDA micro USB
OpenSDA MCU
Boot Entry Button
DEVKIT-MPC5744P Board : Power Supply
12V must be used for CAN and LIN/UART communication.
DEVKIT-MPC5744P supports power through OpenSDA (USB) and
external 12V power supply. NXP does not directly sell 12V power
supplies. You can obtain a power supply through a third-party.
Power supply specifications:
Fully regulated Switching Power Supply
Input Voltage 100-240V AC 50/60Hz
Output 12V 1A/2A DC
Plug size: 5.5mm x 2.1 mm, Center Positive