Datasheet

10
Quick Start Guide
ADDITIONAL INFORMATION
Boot Switches
SW1101, SW1102 are the boot configuration switches, the default boot device is
eMMC/uSDHC3, as shown in Table 4. If you want to try other boot devices, you need
to change the boot switches to corresponding values as listed in Table 4.
Note: 1 = ON 0 = OFF
Table 4 Boot Device settings
BOOT DEVICE SW1101 SW1102
eMMC/uSDHC3 0110110001 0001010100
MicroSD/uSDHC2 0110110010 0001101000
QSPI NOR Flash 0110xxxxxx 00000x0010
Serial Download Mode 1010xxxxxx xxxxxxxxx0
Debug Serial Console
Windows users may need to update the serial drivers on your computer. The drivers
can be found at https://www.ftdichip.com/Drivers/VCP.htm