INTEGRATED CIRCUITS DATA SHEET 74HC04; 74HCT04 Hex inverter Product specification Supersedes data of 1993 Sep 01 2003 Jul 23
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 FEATURES DESCRIPTION • Complies with JEDEC standard no. 8-1A The 74HC/HCT04 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT04 provide six inverting buffers. • ESD protection: HBM EIA/JESD22-A114-A exceeds 2000 V MM EIA/JESD22-A115-A exceeds 200 V. • Specified from −40 to +85 °C and −40 to +125 °C.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 ORDERING INFORMATION PACKAGE TYPE NUMBER TEMPERATURE RANGE PINS PACKAGE MATERIAL CODE 74HC04N −40 to +125 °C 14 DIP14 plastic SOT27-1 74HCT04N −40 to +125 °C 14 DIP14 plastic SOT27-1 74HC04D −40 to +125 °C 14 SO14 plastic SOT108-1 74HCT04D −40 to +125 °C 14 SO14 plastic SOT108-1 74HC04DB −40 to +125 °C 14 SSOP14 plastic SOT337-1 74HCT04DB −40 to +125 °C 14 SSOP14 plastic SOT337-1 74HC04PW
Philips Semiconductors Product specification Hex inverter handbook, halfpage 74HC04; 74HCT04 1A VCC 1 14 handbook, halfpage 1 1A 1Y 2 3 2A 2Y 4 5 3A 3Y 6 5Y 9 4A 4Y 8 4A 11 5A 5Y 10 13 6A 6Y 12 1Y 2 13 6A 2A 3 12 6Y 2Y 4 11 5A 3A 5 10 3Y 6 9 GND(1) Top view 7 8 GND 4Y MBL760 MNA342 (1) The die substrate is attached to this pad using conductive die attach material. It can not be used as a supply pin or input. Fig.2 Pin configuration DHVQFN14.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 RECOMMENDED OPERATING CONDITIONS 74HC04 SYMBOL PARAMETER 74HCT04 CONDITIONS UNIT MIN. TYP. MAX. MIN. TYP. MAX. VCC supply voltage 2.0 5.0 6.0 4.5 5.0 5.5 V VI input voltage 0 − VCC 0 − VCC V VO output voltage 0 − VCC 0 − VCC V Tamb ambient temperature +25 +125 −40 +25 +125 °C tr, tf input rise and fall times see DC and AC −40 characteristics per device VCC = 2.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 DC CHARACTERISTICS Type 74HC04 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL PARAMETER MIN. OTHER TYP. MAX. UNIT VCC (V) Tamb = 25 °C VIH VIL VOH VOL 2.0 1.5 1.2 − V 4.5 3.15 2.4 − V 6.0 4.2 3.2 − V 2.0 − 0.8 0.5 V 4.5 − 2.1 1.35 V 6.0 − 2.8 1.8 V IO = −20 µA 2.0 1.9 2.0 − V IO = −20 µA 4.5 4.4 4.5 − V IO = −4.0 mA 4.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 TEST CONDITIONS SYMBOL PARAMETER MIN. OTHER TYP. MAX. UNIT VCC (V) Tamb = −40 to +85 °C VIH VIL VOH VOL HIGH-level input voltage LOW-level output voltage − − V 4.5 3.15 − − V 4.2 − − V 2.0 − − 0.5 V 4.5 − − 1.35 V 6.0 − − 1.8 V IO = −20 µA 2.0 1.9 − − V IO = −20 µA 4.5 4.4 − − V IO = −4.0 mA 4.5 3.84 − − V IO = −20 µA 6.0 5.9 − − V IO = −5.2 mA 6.0 5.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 TEST CONDITIONS SYMBOL PARAMETER MIN. OTHER TYP. MAX. UNIT VCC (V) Tamb = −40 to +125 °C VIH VIL VOH VOL HIGH-level input voltage LOW-level output voltage − − V 4.5 3.15 − − V 4.2 − − V 2.0 − − 0.5 V 4.5 − − 1.35 V 6.0 − − 1.8 V IO = −20 µA 2.0 1.9 − − V IO = −20 µA 4.5 4.4 − − V IO = −20 µA 6.0 5.9 − − V IO = −4.0 mA 4.5 3.7 − − V IO = −5.2 mA 6.0 5.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 Type 74HCT04 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL PARAMETER MIN. OTHER TYP. MAX. UNIT VCC (V) Tamb = 25 °C VIH HIGH-level input voltage 4.5 to 5.5 2.0 1.6 − V VIL LOW-level input voltage 4.5 to 5.5 − 1.2 0.8 V VOH HIGH-level output voltage IO = −20 µA 4.5 4.4 4.5 − V IO = −4.0 mA 4.5 3.84 4.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 TEST CONDITIONS SYMBOL PARAMETER MIN. OTHER TYP. MAX. UNIT VCC (V) Tamb = −40 to +125 °C VIH HIGH-level input voltage 4.5 to 5.5 2.0 − − V VIL LOW-level input voltage 4.5 to 5.5 − − 0.8 V VOH HIGH-level output voltage IO = −20 µA 4.5 4.4 − − V IO = −4.0 mA 4.5 3.7 − − V IO = 20 µA 4.5 − − 0.1 V IO = 4.0 mA 4.5 − − 0.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 AC CHARACTERISTICS Family 74HC04 GND = 0 V; tr = tf ≤ 6.0 ns; CL = 50 pF. TEST CONDITIONS SYMBOL PARAMETER MIN. WAVEFORMS TYP. MAX. UNIT VCC (V) Tamb = 25 °C tPHL/tPLH tTHL/tTLH propagation delay nA to nY see Figs 6 and 7 output transition time see Figs 6 and 7 2.0 − 25 85 ns 4.5 − 9 17 ns 6.0 − 7 14 ns 2.0 − 19 75 ns 4.5 − 7 15 ns 6.0 − 6 13 ns 2.0 − − 105 ns 4.5 − − 21 ns 6.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 Family 74HCT04 GND = 0 V; tr = tf ≤ 6.0 ns; CL = 50 pF. TEST CONDITIONS SYMBOL PARAMETER MIN. WAVEFORMS TYP. MAX. UNIT VCC (V) Tamb = 25 °C tPHL/tPLH propagation delay nA to nY see Figs 6 and 7 4.5 − 10 19 ns tTHL/tTLH output transition time see Figs 6 and 7 4.5 − 7 15 ns Tamb = −40 to +85 °C tPHL/tPLH propagation delay nA to nY see Figs 6 and 7 4.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 VCC handbook, halfpage PULSE GENERATOR VI VO D.U.T RT CL 50 pF MGK565 Definitions for test circuit: CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to the output impedance Zo of the pulse generator. Fig.7 Load circuitry for switching times.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 PACKAGE OUTLINES DIP14: plastic dual in-line package; 14 leads (300 mil) SOT27-1 ME seating plane D A2 A A1 L c e Z w M b1 (e 1) b MH 8 14 pin 1 index E 1 7 0 5 10 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 min. A2 max. b b1 c D (1) E (1) e e1 L ME MH w Z (1) max. mm 4.2 0.51 3.2 1.73 1.13 0.53 0.38 0.36 0.23 19.50 18.55 6.48 6.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1 D E A X c y HE v M A Z 8 14 Q A2 A (A 3) A1 pin 1 index θ Lp 1 L 7 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) mm 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 8.75 8.55 4.0 3.8 1.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm D SOT337-1 E A X c y HE v M A Z 8 14 Q A2 A (A 3) A1 pin 1 index θ Lp L 7 1 detail X w M bp e 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) θ mm 2 0.21 0.05 1.80 1.65 0.25 0.38 0.25 0.20 0.09 6.4 6.0 5.4 5.2 0.65 7.9 7.6 1.25 1.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1 E D A X c y HE v M A Z 8 14 Q (A 3) A2 A A1 pin 1 index θ Lp L 1 7 detail X w M bp e 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (2) e HE L Lp Q v w y Z (1) θ mm 1.1 0.15 0.05 0.95 0.80 0.25 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.3 0.65 6.6 6.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; SOT762-1 14 terminals; body 2.5 x 3 x 0.85 mm A B D A A1 E c detail X terminal 1 index area terminal 1 index area C e1 e 2 6 y y1 C v M C A B w M C b L 1 7 Eh e 14 8 13 9 Dh X 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A(1) max.
Philips Semiconductors Product specification Hex inverter 74HC04; 74HCT04 DATA SHEET STATUS LEVEL DATA SHEET STATUS(1) PRODUCT STATUS(2)(3) Development DEFINITION I Objective data II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product.
Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. SCA75 © Koninklijke Philips Electronics N.V. 2003 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.
