Datasheet

2003 Jun 17 6
Philips Semiconductors Product specification
Quad bilateral switches 74HC4066; 74HCT4066
RECOMMENDED OPERATING CONDITIONS
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V).
Notes
1. To avoid drawing V
CC
current out of pin nZ, when switch current flows in pin nY, the voltage drop across the
bidirectional switch must not exceed 0.4 V. If the switch current flows into pin nZ, no V
CC
current will flow out of
pin nY. In this case there is no limit for the voltage drop across the switch, but the voltages at pins nY and nZ may
not exceed V
CC
or GND.
2. For DIP14 packages: above 70 °C derate linearly with 12 mW/K.
For SO14 packages: above 70 °C derate linearly with 8 mW/K.
For SSOP14 and TSSOP16 packages: above 60 °C derate linearly with 5.5 mW/K.
For DHVQFN14 packages: above 60 °C derate linearly with 4.5 mW/K.
SYMBOL PARAMETER CONDITIONS
74HC4066 74HCT4066
UNIT
MIN. TYP. MAX. MIN. TYP. MAX.
V
CC
supply voltage 2.0 5.0 10.0 4.5 5.0 5.5 V
V
I
input voltage GND − V
CC
GND − V
CC
V
V
S
switch voltage GND − V
CC
GND − V
CC
V
T
amb
operating ambient
temperature
see DC and AC
characteristics
per device
−40 +25 +85 −40 +25 +85 °C
−40 − +125 −40 − +125 °C
t
r
,t
f
input rise and fall times V
CC
= 2.0 V − 6.0 1000 − 6.0 500 ns
V
CC
= 4.5 V −−500 −−−ns
V
CC
= 6.0 V −−400 −−−ns
V
CC
= 10.0 V −−250 −−−ns
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
V
CC
supply voltage −0.5 +11.0 V
I
IK
input diode current V
I
< −0.5 V or V
I
>V
CC
+ 0.5 V −±20 mA
I
SK
switch diode current V
S
< −0.5 V or V
S
>V
CC
+ 0.5 V −±20 mA
I
S
switch current −0.5V<V
O
<V
CC
+ 0.5 V; note 1 −±25 mA
I
CC
, I
GND
V
CC
or GND current −±50 mA
T
stg
storage temperature −65 +150 °C
P
tot
power dissipation T
amb
= −40 to +125 °C; note 2 − 500 mW
P
S
power dissipation per switch − 100 mW