INTEGRATED CIRCUITS DATA SHEET 74HC4066; 74HCT4066 Quad bilateral switches Product specification Supersedes data of 1998 Nov 10 2003 Jun 17
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 FEATURES GENERAL DESCRIPTION • Very low ON-resistance: The 74HC4066 and 74HCT4066 are high-speed Si-gate CMOS devices and are pin compatible with the HEF4066B. They are specified in compliance with JEDEC standard no. 7A. – 50 Ω (typical) at VCC = 4.5 V – 45 Ω (typical) at VCC = 6.0 V – 35 Ω (typical) at VCC = 9.0 V. The 74HC4066 and 74HCT4066 have four independent analog switches.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 FUNCTION TABLE See note 1. INPUT nE SWITCH L off H on Note 1. H = HIGH voltage level. L = LOW voltage level.
Philips Semiconductors Product specification Quad bilateral switches handbook, halfpage 1Z VCC 1 14 2 2Z 3 2Y 4 2E 5 3E 1Y 74HC4066; 74HCT4066 13 GND(1) 6 12 4E 11 4Y 10 4Z 9 Top view 7 8 GND 3Y handbook, halfpage 1E 13 1E 5 2E 6 3E 12 4E 3Z 1Y 1 1Z 2 2Y 4 2Z 3 3Y 8 3Z 9 4Y 11 4Z 10 MGR254 MBL891 (1) The die substrate is attached to this pad using conductive die attach material. It can not be used as a supply pin or input. Fig.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 nY handbook, halfpage handbook, halfpage13 1E 1 5 4 6 8 12 11 1Y 2E 2Y 3E 3Y 4E 4Y 1Z 2Z 3Z 4Z 2 3 9 10 nE VCC VCC MGR257 GND Fig.5 Functional diagram. 2003 Jun 17 nZ MGR258 Fig.6 Schematic diagram (one switch).
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 RECOMMENDED OPERATING CONDITIONS 74HC4066 SYMBOL PARAMETER 74HCT4066 CONDITIONS UNIT MIN. TYP. MAX. MIN. TYP. MAX. VCC supply voltage 2.0 5.0 10.0 4.5 5.0 5.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 DC CHARACTERISTICS Family 74HC4066 Voltages are referenced to GND (ground = 0 V); Vis is the input voltage at pins nY or nZ, whichever is assigned as an input; Vos is the output voltage at pins nY or nZ, whichever is assigned as an output. TEST CONDITIONS SYMBOL PARAMETER OTHER MIN. TYP. MAX. UNIT 2.0 1.5 1.2 − V 4.5 3.15 2.4 − V 6.0 4.2 3.2 − V 9.0 6.3 4.7 − V 2.0 − 0.8 0.50 V 4.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 TEST CONDITIONS SYMBOL PARAMETER OTHER MIN. TYP. MAX. UNIT 2.0 1.5 − − V 4.5 3.15 − − V 6.0 4.2 − − V 9.0 6.3 − − V 2.0 − − 0.50 V 4.5 − − 1.35 V 6.0 − − 1.80 V 9.0 − − 2.70 V 6.0 − − ±1.0 µA 10.0 − − ±2.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 Family 74HCT4066 Voltages are referenced to GND (ground = 0 V); Vis is the input voltage at pins nY or nZ, whichever is assigned as an input; Vos is the output voltage at pins nY or nZ, whichever is assigned as an output. TEST CONDITIONS SYMBOL PARAMETER MIN. OTHER TYP. MAX. UNIT VCC (V) Tamb = −40 to +85 °C; note 1 4.5 to 5.5 2.0 HIGH-level input voltage VIL LOW-level input voltage 1.2 0.
Philips Semiconductors Product specification Quad bilateral switches handbook, full pagewidth 74HC4066; 74HCT4066 LOW (from enable inputs) nY VI = VCC or GND nZ A A VO = GND or VCC GND MGR260 Fig.7 Test circuit for measuring OFF-state current. handbook, full pagewidth HIGH (from enable inputs) nY VI = VCC or GND nZ A A GND MGR261 Fig.8 Test circuit for measuring ON-state current.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 Resistance RON for 74HC4066 and 74HCT4066 For 74HC4066: VCC = 2.0, 4.5, 6.0 and 9.0 V; for 74HCT4066: VCC = 4.5 V; note 1; Vis is the input voltage at pins nY or nZ, whichever is assigned as an input; see Fig.9. TEST CONDITIONS SYMBOL PARAMETER OTHER IS (µA) MIN. TYP. MAX.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 handbook, full pagewidth HIGH (from enable inputs) V nY nZ Vis = 0 to VCC − GND Is GND MGR259 Fig.9 Test circuit for measuring ON-resistance (RON). MGR262 60 handbook, halfpage RON (Ω) VCC = 4.5 V 50 6V 40 9V 30 20 10 0 1.8 3.6 5.4 7.2 9 Vis (V) Vis = 0 to VCC. Fig.10 Typical ON-resistance (RON) as a function of input voltage (Vis).
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 AC CHARACTERISTICS Type 74HC4066 GND = 0 V; tr = tf = 6 ns; CL = 50 pF; Vis is the input voltage at pins nY or nZ, whichever is assigned as an input; Vos is the output voltage at pins nY or nZ, whichever is assigned as an output. TEST CONDITIONS SYMBOL PARAMETER OTHER MIN. TYP. MAX. UNIT 2.0 − 8 75 ns 4.5 − 3 15 ns 6.0 − 2 13 ns 9.0 − 2 10 ns 2.0 − 36 125 ns 4.5 − 13 25 ns 6.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 Type 74HCT4066 GND = 0 V; tr = tf = 6 ns; CL = 50 pF; Vis is the input voltage at pins nY or nZ, whichever is assigned as an input; Vos is the output voltage at pins nY or nZ, whichever is assigned as an output. TEST CONDITIONS SYMBOL PARAMETER OTHER MIN. TYP. MAX. UNIT VCC (V) Tamb = −40 to +85 °C; note 1 tPHL/tPLH propagation delay Vis to Vos RL = ∞; see Fig.19 4.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 MGR263 0 handbook, full pagewidth (dB) −20 −40 −60 −80 −100 10 102 103 104 105 f (kHz) 106 Test conditions: VCC = 4.5 V; GND = 0 V; RL = 50 Ω; Rsource = 1 kΩ. Fig.11 Typical switch OFF signal feed-through as a function of frequency. MGR264 5 handbook, full pagewidth (dB) 0 −5 10 102 103 104 Test conditions: VCC = 4.5 V; GND = 0 V; RL = 50 Ω; Rsource = 1 kΩ. Fig.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 VCC handbook, full pagewidth 2RL 0.1 µF VI nY/nZ nZ/nY RL 2RL CL channel ON GND MGR265 Fig.13 Test circuit for measuring crosstalk between any two switches; channels ON condition. VCC handbook, full pagewidth VCC 2RL 2RL nY/nZ nZ/nY 2RL 2RL channel OFF Vos CL dB GND MGR266 Fig.14 Test circuit for measuring crosstalk between any two switches; channels OFF condition.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 The crosstalk is defined as follows handbook, full pagewidth (oscilloscope output). VCC VCC nE VCC GND 2RL fpage nY/nZ Vct(p-p) 2RL nZ/nY D.U.T. 2RL MGR267 CL 2RL Vos oscilloscope GND MGR268 Fig.15 Test circuit for measuring crosstalk between control and any switch. VCC handbook, full pagewidth 0.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 VCC handbook, full pagewidth 10 µF fi = 1 kHz sine-wave Vis 2RL nY/nZ nZ/nY 2RL CL channel ON Vos DISTORTION METER GND MGR270 Fig.17 Test circuit for measuring sine wave distortion. VCC handbook, full pagewidth 0.1 µF Vis 2RL nY/nZ nZ/nY 2RL CL Vos dB channel OFF GND MGR271 Fig.18 Test circuit for measuring switch OFF signal feed-through.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 AC WAVEFORMS tr handbook, full pagewidth tf VCC 90% Vis 50% 10% GND Vos 50% tPLH tPHL MGR272 Fig.19 Waveforms showing the input (Vis) to output (Vos) propagation delays.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 TEST CIRCUIT AND WAVEFORMS VCC Vis handbook, full pagewidth PULSE GENERATOR VI VCC VO RL switch open D.U.T. CL RT GND MGR273 TEST SWITCH Vis tPZH GND VCC tPZL VCC GND tPHZ GND VCC tPLZ VCC GND other open pulse Definitions for test circuit: RL = Load resistance. CL = Load capacitance including jig and probe capacitance.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 PACKAGE OUTLINES DIP14: plastic dual in-line package; 14 leads (300 mil) SOT27-1 ME seating plane D A2 A A1 L c e Z w M b1 (e 1) b MH 8 14 pin 1 index E 1 7 0 5 10 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 min. A2 max. b b1 c D (1) E (1) e e1 L ME MH w Z (1) max. mm 4.2 0.51 3.2 1.73 1.13 0.53 0.38 0.36 0.23 19.50 18.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1 D E A X c y HE v M A Z 8 14 Q A2 A (A 3) A1 pin 1 index θ Lp 1 L 7 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) mm 1.75 0.25 0.10 1.45 1.25 0.25 0.49 0.36 0.25 0.19 8.75 8.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm D SOT337-1 E A X c y HE v M A Z 8 14 Q A2 A (A 3) A1 pin 1 index θ Lp L 7 1 detail X w M bp e 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) θ mm 2 0.21 0.05 1.80 1.65 0.25 0.38 0.25 0.20 0.09 6.4 6.0 5.4 5.2 0.65 7.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1 E D A X c y HE v M A Z 8 14 Q (A 3) A2 A A1 pin 1 index θ Lp L 1 7 detail X w M bp e 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (2) e HE L Lp Q v w y Z (1) θ mm 1.1 0.15 0.05 0.95 0.80 0.25 0.30 0.19 0.2 0.1 5.1 4.9 4.5 4.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; SOT762-1 14 terminals; body 2.5 x 3 x 0.85 mm A B D A A1 E c detail X terminal 1 index area terminal 1 index area C e1 e 2 6 y y1 C v M C A B w M C b L 1 7 Eh e 14 8 13 9 Dh X 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A(1) max.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 type oven. Throughput times (preheating, soldering and cooling) vary between 100 and 200 seconds depending on heating method. SOLDERING Introduction This text gives a very brief insight to a complex technology. A more in-depth account of soldering ICs can be found in our “Data Handbook IC26; Integrated Circuit Packages” (document order number 9398 652 90011).
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 During placement and before soldering, the package must be fixed with a droplet of adhesive. The adhesive can be applied by screen printing, pin transfer or syringe dispensing. The package can be soldered after the adhesive is cured. MANUAL SOLDERING Fix the component by first soldering two diagonally-opposite end leads. Use a low voltage (24 V or less) soldering iron applied to the flat part of the lead.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 DATA SHEET STATUS LEVEL DATA SHEET STATUS(1) PRODUCT STATUS(2)(3) Development DEFINITION I Objective data II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date.
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 NOTES 2003 Jun 17 29
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 NOTES 2003 Jun 17 30
Philips Semiconductors Product specification Quad bilateral switches 74HC4066; 74HCT4066 NOTES 2003 Jun 17 31
Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. SCA75 © Koninklijke Philips Electronics N.V. 2003 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
