INTEGRATED CIRCUITS DATA SHEET 74HC4052; 74HCT4052 Dual 4-channel analog multiplexer, demultiplexer Product specification Supersedes data of 1997 Aug 27 2003 May 16
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 FEATURES DESCRIPTION • Wide analog input voltage range from −5 V to +5 V The 74HC4052/74HCT4052 are high-speed Si-gate CMOS devices and are pin compatible with the HEF4052B. They are specified in compliance with JEDEC standard no. 7A. • Low ON-resistance: – 80 Ω (typical) at VCC − VEE = 4.5 V – 70 Ω (typical) at VCC − VEE = 6.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 QUICK REFERENCE DATA VEE = GND = 0 V; Tamb = 25 °C; tr = tf = 6 ns. TYPICAL SYMBOL PARAMETER CONDITIONS UNIT 74HC4052 74HCT4052 tPZH/tPZL turn-on time E or Sn to Vos CL = 15 pF; RL = 1 kΩ; VCC = 5 V 28 18 ns tPHZ/tPLZ turn-off time E or Sn to Vos CL = 15 pF; RL = 1 kΩ; VCC = 5 V 21 13 ns CI input capacitance 3.5 3.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 PINNING PIN SYMBOL DESCRIPTION 1 2Y0 independent input or output 2 2Y2 independent input or output 3 2Z common input or output 4 2Y3 independent input or output 5 2Y1 independent input or output 6 E enable input (active LOW) 7 VEE negative supply voltage 8 GND ground (0 V) 9 S1 select logic input 10 S0 select logic input 11 1Y3 independent input or output
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 handbook, halfpage 10 13 handbook, halfpage 9 1Z 1Y0 12 6 0 1 4× 0 3 G4 10 S0 1Y1 14 9 S1 1Y2 15 1Y3 11 2Y0 1 2 2Y1 5 3 2Y2 2 2Y3 4 6 E MDX 0 1 3 1 5 2 4 12 14 13 2Z 15 MNB040 11 3 MNB041 Fig.3 Logic symbol. Fig.4 IEC logic symbol.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 nYn handbook, full pagewidth VCC VEE VCC VCC VCC VEE from logic VEE nZ MNB043 Fig.6 Schematic diagram (one switch). LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to VEE = GND (ground = 0 V); note 1. SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT −0.5 +11.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 RECOMMENDED OPERATING CONDITIONS 74HC4052 SYMBOL PARAMETER UNIT MIN. supply voltage VCC 74HCT4052 CONDITIONS TYP. MAX. MIN. TYP. MAX. see Figs 7 and 8 VCC − GND 2.0 5.0 10.0 4.5 5.0 5.5 V VCC − VEE 2.0 5.0 10.0 2.0 5.0 10.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 DC CHARACTERISTICS Family 74HC4052 Vis is the input voltage at pins nYn or nZ, whichever is assigned as an input; Vos is the output voltage at pins nZ or nYn, whichever is assigned as an output; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL PARAMETER VCC (V) OTHER MIN. TYP. MAX. UNIT VEE (V) Tamb = −40 to +85 °C; note 1 VIH VIL ILI IS(OFF) 2.0 − 1.5 1.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 TEST CONDITIONS SYMBOL PARAMETER OTHER VCC (V) MIN. TYP. MAX. UNIT VEE (V) Tamb = −40 to +125 °C VIH VIL ILI IS(OFF) 2.0 − 1.5 − − V 4.5 − 3.15 − − V 6.0 − 4.2 − − V 9.0 − 6.3 − − V 2.0 − − − 0.5 V 4.5 − − − 1.35 V 6.0 − − − 1.8 V 9.0 − − − 2.7 V 6.0 0 − − ±1.0 µA 10.0 0 − − ±2.0 µA per channel 10.0 0 − − ±1.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 Family 74HCT4052 Vis is the input voltage at pins nYn or nZ, whichever is assigned as an input; Vos is the output voltage at pins nZ or nYn, whichever is assigned as an output; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL PARAMETER OTHER VCC (V) MIN. TYP. MAX. UNIT VEE (V) Tamb = −40 to +85 °C; note 1 VIH HIGH-level input voltage 4.5 to 5.5 − 2.0 1.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer handbook, full pagewidth 74HC4052; 74HCT4052 LOW (from select input) nYn nZ A A VI = VCC or VEE VO = VEE or VCC VEE MNB048 Fig.9 Test circuit for measuring OFF-state current. handbook, full pagewidth HIGH (from select input) nYn nZ A VI = VEE or VCC VO (open circuit) VEE MNB049 Fig.10 Test circuit for measuring ON-state current.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 Resistance RON for 74HC4052 and 74HCT4052 Vis is the input voltage at pins nYn or nZ, whichever is assigned as an input; see notes 1 and 2; see Fig.11. TEST CONDITIONS SYMBOL PARAMETER MIN. OTHER TYP. MAX. UNIT − Ω 100 225 Ω 90 200 Ω − 70 165 Ω 100 − 150 − Ω 1000 − 80 175 Ω 0 1000 − 70 150 Ω 4.5 −4.5 1000 − 60 130 Ω 2.0 0 100 − 150 − Ω 4.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 handbook, full pagewidth HIGH (from select input) V nYn nZ Vis = 0 to VCC − VEE Iis VEE MNB046 Fig.11 Test circuit for measuring RON. MNB047 100 handbook, halfpage RON (1) (Ω) 80 (2) 60 (3) 40 20 0 0 1.8 3.6 5.4 7.2 9 Vis (V) Vis = 0 to VCC − VEE (1) VCC = 4.5 V (2) VCC = 6 V (3) VCC = 9 V Fig.12 Typical RON as a function of input voltage Vis.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 AC CHARACTERISTICS Type 74HC4052 GND = 0 V; tr = tf = 6 ns; CL = 50 pF. TEST CONDITIONS SYMBOL PARAMETER MIN. OTHER TYP. MAX. UNIT VCC (V) VEE (V) Tamb = −40 to +85 °C; note 1 tPHL/tPLH tPZH/tPZL tPHZ/tPLZ propagation delay Vis to Vos RL = ∞; see Fig.19 turn-on time E, Sn to Vos turn-off time E, Sn to Vos 2.0 0 − 14 75 ns 4.5 0 − 5 15 ns 6.0 0 − 4 13 ns 4.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 Type 74HCT4052 GND = 0 V; tr = tf = 6 ns; CL = 50 pF. TEST CONDITIONS SYMBOL PARAMETER MIN. OTHER TYP. MAX. UNIT VCC (V) VEE (V) Tamb = −40 to +85 °C; note 1 tPHL/tPLH propagation delay Vis to Vos RL = ∞; see Fig.19 tPZH/tPZL turn-on time E, Sn to Vos tPHZ tPLZ turn-off time E, Sn to Vos 4.5 0 − 5 15 ns 4.5 −4.5 − 4 10 ns RL = 1 kΩ; see Figs 20, 4.5 22 and 21 4.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 Type 74HC4052 and 74HCT4052 Recommended conditions and typical values; GND = 0 V; Tamb = 25 °C; CL = 50 pF. Vis is the input voltage at pins nYn or nZ, whichever is assigned as an input. Vos is the output voltage at pins nYn or nZ, whichever is assigned as an output. TEST CONDITIONS SYMBOL PARAMETER dsin sine-wave distortion TYP. UNIT −2.25 0.04 % 4.5 −4.5 0.02 % 4.0 2.25 −2.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer handbook, full pagewidth 0.1 µF Vis 74HC4052; 74HCT4052 nYn/nZ nZ/nYn Vos CL dB RL channel OFF GND MNB053 Fig.14 Test circuit for measuring switch OFF signal feed-through. 0 handbook, full pagewidth −0 −0 −0 −0 −00 0 0 0 0 0 0 Test conditions: VCC = 4.5 V; GND = 0 V; VEE = −4.5 V; RL = 50 Ω; Rsource = 1 kΩ. Fig.15 Typical switch OFF signal feed-through as a function of frequency.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 The crosstalk is defined as follows VCC handbook, full pagewidth (oscilloscope output): VCC Sn or E 2RL V(p−p) 2RL nYn/nZ nZ/nYn DUT 2RL 2RL CL oscilloscope GND VEE MNB055 Fig.17 Test circuit for measuring crosstalk between control and any switch. 5 handbook, full pagewidth 0 −5 0 0 0 0 Test conditions: VCC = 4.5 V; GND = 0 V; VEE = −4.5 V; RL = 50 Ω; Rsource = 1 kΩ. Fig.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 AC WAVEFORMS VI handbook, halfpage 50% Vis input GND tPLH tPHL VOH 50% Vos output VOL MNB056 Fig.19 Waveforms showing the input (Vis) to output (Vos) propagation delays. tr handbook, full pagewidth tf 90% VM E, Sn input 10% tPLZ tPZL 50% Vos output 10% tPHZ tPZH 90% 50% Vos output switch ON switch OFF switch ON MNB057 For 74HC4052: VM = 50%; VI = GND to VCC.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 tW handbook, full pagewidth amplitude 90% negative input pulse VM 10% 0V tTHL (tf) tTLH (tr) tTLH (tr) tTHL (tf) amplitude 90% positive input pulse VM 10% 0V tW FAMILY AMPLITUDE VM MNB059 tr and tf fmax; PULSE WIDTH OTHER 74HC4052 VCC 50% <2 ns 6 ns 74HCT4052 3.0 V 1.3 V <2 ns 6 ns Fig.21 Input pulse definitions.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 PACKAGE OUTLINES SO16: plastic small outline package; 16 leads; body width 3.9 mm; body thickness 1.47 mm D E SOT109-3 A X c y HE v M A Z 16 9 A2 A (A 3) A1 pin 1 index θ Lp 1 L 8 e 0 detail X w M bp 2.5 5 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp v w y Z (1) mm 1.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm D SOT338-1 E A X c y HE v M A Z 9 16 Q A2 A (A 3) A1 pin 1 index θ Lp L 8 1 detail X w M bp e 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) θ mm 2 0.21 0.05 1.80 1.65 0.25 0.38 0.25 0.20 0.09 6.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 DIP16: plastic dual in-line package; 16 leads (300 mil) SOT38-9 ME seating plane D A2 A A1 L b1 e Z c w M (e1) b 9 16 MH b2 pin 1 index E 1 8 0 5 10 mm scale DIMENSIONS (mm dimensions are derived from the original inch dimensions) UNIT A max. A1 min. A2 max. b b1 b2 c D (1) E (1) e e1 L ME MH w Z (1) max. mm 4.32 0.38 3.56 1.65 1.40 0.51 0.41 1.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm SOT403-1 E D A X c y HE v M A Z 9 16 Q (A 3) A2 A A1 pin 1 index θ Lp L 1 8 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (2) e HE L Lp Q v w y Z (1) θ mm 1.1 0.15 0.05 0.95 0.80 0.25 0.30 0.19 0.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 DHVQFN16: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; SOT763-1 16 terminals; body 2.5 x 3.5 x 0.85 mm A B D A A1 E c detail X terminal 1 index area terminal 1 index area C e1 e 2 7 y y1 C v M C A B w M C b L 1 8 Eh e 16 9 15 10 Dh X 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A(1) max.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 If wave soldering is used the following conditions must be observed for optimal results: SOLDERING Introduction to soldering surface mount packages • Use a double-wave soldering method comprising a turbulent wave with high upward pressure followed by a smooth laminar wave. This text gives a very brief insight to a complex technology.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 Suitability of surface mount IC packages for wave and reflow soldering methods SOLDERING METHOD PACKAGE(1) WAVE BGA, LBGA, LFBGA, SQFP, TFBGA, VFBGA not suitable suitable(3) DHVQFN, HBCC, HBGA, HLQFP, HSQFP, HSOP, HTQFP, HTSSOP, HVQFN, HVSON, SMS not PLCC(4), SO, SOJ suitable LQFP, QFP, TQFP SSOP, TSSOP, VSO, VSSOP REFLOW(2) suitable suitable suitable not recommended(4)(5) suitab
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 DATA SHEET STATUS LEVEL DATA SHEET STATUS(1) PRODUCT STATUS(2)(3) Development DEFINITION I Objective data II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date.
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 NOTES 2003 May 16 29
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 NOTES 2003 May 16 30
Philips Semiconductors Product specification Dual 4-channel analog multiplexer, demultiplexer 74HC4052; 74HCT4052 NOTES 2003 May 16 31
Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. SCA75 © Koninklijke Philips Electronics N.V. 2003 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
