Datasheet

74AHC1GU04_5 © NXP B.V. 2007. All rights reserved.
Product data sheet Rev. 05 — 10 July 2007 3 of 12
NXP Semiconductors
74AHC1GU04
Inverter
8. Limiting values
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For both TSSOP5 and SC-74A packages: above 87.5 °C the value of P
tot
derates linearly with 4.0 mW/K.
9. Recommended operating conditions
10. Static characteristics
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage −0.5 +7.0 V
I
IK
input clamping current V
I
< −0.5 V −20 - mA
V
I
input voltage
[1]
−0.5 +7.0 V
I
OK
output clamping current V
O
< −0.5 V or V
O
>V
CC
+ 0.5 V - ±20 mA
I
O
output current −0.5 V < V
O
< V
CC
+ 0.5 V - ±25 mA
I
CC
supply current - 75 mA
I
GND
ground current −75 - mA
T
stg
storage temperature −65 +150 °C
P
tot
total power dissipation T
amb
= −40 °C to +125 °C
[2]
- 250 mW
Table 6. Recommended operating conditions
Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Typ Max Unit
V
CC
supply voltage 2.0 5.0 5.5 V
V
I
input voltage 0 - 5.5 V
V
O
output voltage 0 - V
CC
V
T
amb
ambient temperature −40 +25 +125 °C
∆t/∆V input transition rise and fall rate V
CC
= 3.3 V ± 0.3 V - - 100 ns/V
V
CC
= 5.0 V ± 0.5 V - - 20 ns/V
Table 7. Static characteristics
Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions 25 °C −40 °C to +85 °C −40 °C to +125 °C Unit
Min Typ Max Min Max Min Max
V
IH
HIGH-level
input voltage
V
CC
= 2.0 V 1.7 - - 1.7 - 1.7 - V
V
CC
= 3.0 V 2.4 - - 2.4 - 2.4 - V
V
CC
= 5.5 V 4.4 - - 4.4 - 4.4 - V
V
IL
LOW-level
input voltage
V
CC
= 2.0V - - 0.3 - 0.3 - 0.3 V
V
CC
= 3.0 V - - 0.6 - 0.6 - 0.6 V
V
CC
= 5.5 V - - 1.1 - 1.1 - 1.1 V