Datasheet

TJA1055 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved.
Product data sheet Rev. 5 — 6 December 2013 22 of 26
NXP Semiconductors
TJA1055
Enhanced fault-tolerant CAN transceiver
For further information on temperature profiles, refer to Application Note AN10365
“Surface mount reflow soldering description”.
15. Appendix
15.1 Overview of differences between the TJA1055 and the TJA1054A
[1] The ESD performance of pins CANH, CANL, RTH and RTL, with respect to GND, was verified by an external test house in accordance
with IEC-61000-4-2 (C = 150 pF, R = 330 ). The results were equal to, or better than, 6 kV for TJA1055 and equal to, or better than,
1.5 kV for TJA1054A.
MSL: Moisture Sensitivity Level
Fig 10. Temperature profiles for large and small components
001aac844
temperature
time
minimum peak temperature
= minimum soldering temperature
maximum peak temperature
= MSL limit, damage level
peak
temperature
Table 12. Limiting values
Symbol Parameter Conditions TJA1055 TJA1054A Unit
Min Max Min Max
V
CANH
voltage on pin CANH 58 +58 27 +40 V
V
CANL
voltage on pin CANL 58 +58 27 +40 V
V
esd
electrostatic discharge voltage pins RTH, RTL, CANH, CANL
human body model 8+84+4kV
IEC 61000-4-2
[1]