Datasheet

TDA8025_1 © NXP B.V. 2009. All rights reserved.
Product data sheet Rev. 01 — 6 April 2009 3 of 38
NXP Semiconductors
TDA8025
IC card interface
[1] To enable the microcontroller to provide the required maximum voltage input level on XTAL1, V
DD(INTF)
must not exceed
V
DD(INTREGD)
+ 0.3 V. See Section 8.1 on page 7 for specific limitations on the maximum V
DD(INTF)
voltage and Table 8 on page 23 for
the limits of XTAL1.
[2] See Figure 12 on page 18.
5. Ordering information
I
CC
supply current 0 V to 3 V - - 65 mA
0 V to 1.8 V - - 65 mA
0 V to 1.2 V - - 30 mA
SR slew rate up or down 0.02 0.14 0.26 V/µs
General
t
deact
deactivation time total sequence
[2]
35 80 100 µs
P
tot
total power
dissipation
T
amb
= −25 °C to +85 °C - - 0.56 W
T
amb
ambient temperature −25 - +85 °C
Table 1. Quick reference data
…continued
Symbol Parameter Conditions Min Typ Max Unit
Table 2. Ordering information
Type number Package
Name Description Version
TDA8025HN HVQFN32 plastic thermal enhanced very thin quad flat package; no leads;
32 terminals; body 5 × 5 × 0.85 mm
SOT617-1