Datasheet

PEMD48_PUMD48 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 6 — 24 January 2012 3 of 16
NXP Semiconductors
PEMD48; PUMD48
NPN/PNP resistor-equipped transistors
5. Limiting values
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2] Reflow soldering is the only recommended soldering method.
Table 6. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
Per transistor; for the PNP transistor with negative polarity
V
CBO
collector-base voltage open emitter - 50 V
V
CEO
collector-emitter voltage open base - 50 V
V
EBO
emitter-base voltage open collector
TR1 (NPN) - 10 V
TR2 (PNP) - 5V
V
I
input voltage TR1
positive - +40 V
negative - 10 V
input voltage TR2
positive - +5 V
negative - 12 V
I
O
output current - 100 mA
I
CM
peak collector current - 100 mA
P
tot
total power dissipation T
amb
 25 C
PEMD48 (SOT666)
[1][2]
-200mW
PUMD48 (SOT363)
[1]
-200mW
Per device
P
tot
total power dissipation T
amb
 25 C
PEMD48 (SOT666)
[1][2]
-300mW
PUMD48 (SOT363)
[1]
-300mW
T
j
junction temperature - 150 C
T
amb
ambient temperature 65 +150 C
T
stg
storage temperature 65 +150 C