Datasheet

PEMH11_PUMH11 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 6 — 29 November 2011 3 of 14
NXP Semiconductors
PEMH11; PUMH11
NPN/NPN resistor-equipped transistors; R1 = 10 k, R2 = 10 k
5. Limiting values
[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
[2] Reflow soldering is the only recommended soldering method.
Table 6. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter Conditions Min Max Unit
Per transistor
V
CBO
collector-base voltage open emitter - 50 V
V
CEO
collector-emitter voltage open base - 50 V
V
EBO
emitter-base voltage open collector - 10 V
V
I
input voltage
positive - +40 V
negative - 10 V
I
O
output current - 100 mA
I
CM
peak collector current - 100 mA
P
tot
total power dissipation T
amb
 25 C
[1]
PEMH11 (SOT666)
[2]
-200mW
PUMH11 (SOT363) - 200 mW
Per device
P
tot
total power dissipation T
amb
 25 C
[1]
PEMH11 (SOT666)
[2]
-300mW
PUMH11 (SOT363) - 300 mW
T
j
junction temperature - 150 C
T
amb
ambient temperature 65 +150 C
T
stg
storage temperature 65 +150 C