Datasheet

PCA9703 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2014. All rights reserved.
Product data sheet Rev. 4 — 5 September 2014 25 of 28
NXP Semiconductors
PCA9703
18 V tolerant SPI 16-bit GPI with maskable INT
16. Abbreviations
17. Revision history
Table 9. Abbreviations
Acronym Description
ASSP Application Specific Standard Product
CAN Controller Area Network
CDM Charged-Device Model
DUT Device Under Test
ECU Electronic Control Unit
ESD ElectroStatic Discharge
GPI General Purpose Input
HBM Human Body Model
HS-CAN High-Speed Controller Area Network
LIN Local Interconnect Network
MSB Most Significant Bit
PCB Printed-Circuit Board
PPAP Production Part Approval Process
RC Resistor-Capacitor network
SBC System Basis Chip
SPI Serial Peripheral Interface
C microcontroller
Table 10. Revision history
Document ID Release date Data sheet status Change notice Supersedes
PCA9703 v.4 20140905 Product data sheet - PCA9703 v.3
Modifications:
• Table 5, V
hys
: Updated conditions, min, typ and unit. Removed table note [3]. Aligned to
characterization data, no change to device.
• Removed references to hysteresis in Section 2, Figure 5, Section 7.4.1.
PCA9703 v.3 20140317 Product data sheet - PCA9703 v.2
PCA9703 v.2 20120614 Product data sheet - PCA9703 v.1
PCA9703 v.1 20100223 Product data sheet - -