Datasheet

PCA9600 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2011. All rights reserved.
Product data sheet Rev. 5 — 5 May 2011 28 of 31
NXP Semiconductors
PCA9600
Dual bidirectional bus buffer
14. Revision history
Table 11. Revision history
Document ID Release date Data sheet status Change notice Supersedes
PCA9600 v.5 20110505 Product data sheet - PCA9600 v.4
Modifications:
• Section 2 “Features and benefits”, eighth bullet item: deleted phrase “450 V MM per
JESD22-A115”
• Table 6 “Characteristics”, sub-section “Output logic LOW level, Pins SX and SY”:
– Unit for V
OL
, condition I
SX
= I
SY
= 0.3 mA is corrected from “mV” to “V”.
• Table 6 “Characteristics”, sub-section “Input logic switching threshold voltages, Pins SX and SY”:
– Changed V
IL
Min value from “425 mV” to “-”.
– Changed V
IL
Typ value from “500 mV” to “-”.
– Changed V
IL
Max value from “-” to “425 mV”.
– Changed V
th(IH)
Min value from “-” to “580 mV”.
– Changed V
th(IH)
Typ value from “500 mV” to “-”.
– Changed V
th(IH)
Max value from “580 mV” to “-”.
• Table 6 “Characteristics”, sub-section “Input logic switching threshold voltages, Pins TX and TY”:
– Under Conditions for I
O
, output current: deleted word “dynamic”.
• Table 6 “Characteristics”: Table note [1] re-written.
• Figure 7 modified to add “typical” curve.
• Figure 8 modified to add “typical” curve.
PCA9600 v.4 20091111 Product data sheet - PCA9600 v.3
PCA9600 v.3 20090903 Product data sheet - PCA9600 v.2
PCA9600 v.2 20080813 Product data sheet - PCA9600 v.1
PCA9600 v.1 20080602 Product data sheet - -