Datasheet
Learn More:
For current information about Freescale
products and documentation, please visit
www.freescale.com.
Freescale and the Freescale logo are trademarks or registered trademarks of Freescale Semiconductor, Inc.
in the U.S. and other countries. All other product or service names are the property of their respective owners.
The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are
trademarks and service marks licensed by Power.org. © Freescale Semiconductor, Inc. 2009.
Document Number: MPC8308FS
REV 1
Cost-Effective Package
The MPC8308 processor is designed with a
very low-cost 473-pin MAPBGA package at
0.8 mm pitch and 19 mm x 19 mm dimension.
This smaller package dimension is suitable
for small-footprint applications in single-board
computing and other embedded networking
applications.
Cost-Effective Reference Design Board
The MPC8308-RDB (reference design board)
is available to customers for US$299. The
kit includes Linux
®
2.6 BSP with optimized
drivers to support all peripherals, along
with a free six-month evaluation license for
CodeWarrior™ development tools.
Application
MPC8308 Values
Smart Metering
• Lessthan1.23Wtypicalpowerhelpssupportfanlessdesignsinharshenvironments
• 10/100(Ethernet+Powerlineconnectivity)
• PCIExpress
®
interconnect for Wi-Fi/WiMAX
• SupportforZigBee
®
technology connectivity
Test/Measurement
• IEEE
®
1588v2 support for nanosecond-level clock accuracy
• Doubleprecisionoatingpointunit(FPU)
• IntegratedserialcommunicationsandDDR2memorycontrollersreducesystem
chip count
Industrial Control
• Controlandnetworkingprocessingforfactoryautomationgateways
• IEEE
®
1588 support for nanosecond-level clock accuracy
• IntegratedEthernetcontrollerssupportindustrialEthernetprotocolsforaccessto
networked devices on the factory floor
Consumer Printing
• IntegratedPCIExpresswithGigabitEthernetinterfaceenablesmultipleexible
I/O options
• Efcientcore:1.92DMIPs/MHz
• SD/MMCandHigh-SpeedUSB2.0interface
Wireless Access Point
• IntegratedPCIExpresstosupportWLANconnectivity
• Cost-effectivecontrollerwithGigabitEthernetandUSBintegrated
• USBportforfront-panelcodeuploadswhenconnectingdirectlytoaPCfor
maintenance
Building Automation
• WithintegratedEthernetandUSB,theMPC8308isengineeredtoseamlessly
communicate across a variety of protocols
• <1.23Wtypicalpowerhelpssupportfanlessdesignsinharshenvironments
MPC8308 Processor Highlights
Core
e300c3, 2-IU, w/FPU, up to 400 MHz
L1 I/D Cache
16 KI/16 KD
Memory Controller
16/32-bit DDR2-266 with optional 8-bit ECC support
Local Bus Controller
8-bit w/NAND boot support
PCI Express
®
x1, PCI Express 1.0a-compatible controller
Ethernet
x2 10/100/1000 MACs, MII, RGMII
USB
1 High-Speed USB 2.0 host/device with ULPI interface to external PHY
eSDHC
SD/MMC/SDIO support up to 50 MHz clock
UART
Dual
I
2
C
Dual
SPI
1
Boot Options
NOR, NAND, I
2
C boot sequencer
Interrupt Controller
IPIC
GPIO
Up to 24
DMA
DMAC, multi-channel DMA controller
Estimated Power
<1.23Wattat333MHz(typical)
IEEE
®
1588v2
Time stamping for clock synchronization
Operating Temperature Range
0ºC T
A
(ambienttemp)to+85ºCT
J
(junction temp)
0ºC T
A
to+105ºCT
J
-40ºC T
A
to+105ºCT
J
Package
473-pin MAPBGA package, 19 mm x 19 mm