Datasheet

MPC8250 Hardware Specifications, Rev. 2
Freescale Semiconductor 55
Package Description
5 Package Description
The following sections provide the package parameters and mechanical dimensions.
CLKIN2 K21
SPARE4
2
C14
PCI_MODE
3
AD24
SPARE6
2
B15
THERMAL0
4
E17
THERMAL1
4
C23
I/O power E6, F6, H6, L5, L6, P6, T6, U6, V5,
Y5, AA6, AA8, AA10, AA11, AA14,
AA16, AA17, AB19, AB20, W21,
U21, T21, P21, N21, M22, J22,
H21, F21, F19, F17, E16, F14,
E13, E12, F10, E10, E9
Core Power L3, V4, W3, AC11, AD11, AB15,
U25, T24, J24, H25, F23, B19,
D17, C17, D10, C10
Ground A2, B1, B2, A5, C5, C18, D4, D6,
G2, L4, P1, R1, R4, AC4, AE7,
AC23, Y25, N24, J23, A23, D23,
D20, E18, A13, A16, K10, K11,
K12, K13, K14, K15, K16, K17,
L10, L11, L12, L13, L14, L15, L16,
L17, M10, M11, M12, M13, M14,
M15, M16, M17, N10, N11, N12,
N13, N14, N15, N16, N17, P10,
P11, P12, P13, P14, P15, P16,
P17, R10, R11,R12, R13, R14,
R15, R16, R17, T10, T11, T12,
T13, T14, T15, T16, T17, U10,
U11, U12, U13, U14, U15, U16,
U17
1
The default configuration of the CPM pins (PA[0–31], PB[4–31], PC[0–31], PD[4–31]) is input. To prevent excessive
DC current, it is recommended to either pull unused pins to GND or VDDH, or to configure them as outputs.
2
Must be pulled down or left floating.
3
If PCI is not desired, must be pulled up or left floating.
4
For information on how to use this pin, refer to MPC8260 PowerQUICC II Thermal Resistor Guide (AN2271/D).
Table 22. MPC8250 PBGA Package Pinout List (continued)
Pin Name Ball