Datasheet

Interrupt Controller Modules
10-6 Freescale Semiconductor
10.3 Register Descriptions
10.3.1 Interrupt Pending Registers (IPRHn, IPRLn)
The IPRHn and IPRLn registers, Figure 10-1 and Figure 10-2, are each 32 bits in size, and provide a bit
map for each interrupt request to indicate if there is an active request (1 = active request, 0 = no request)
for the given source. The state of the interrupt mask register does not affect the IPRn. The IPRn is cleared
by reset. The IPRn is a read-only register, so any attempted write to this register is ignored. Bit 0 is not
implemented and reads as a zero.
0x80–0xDC Reserved
0xE0 SWIACK Reserved
0xE4 L1IACK Reserved
0xE8 L2IACK Reserved
0xEC L3IACK Reserved
0xF0 L4IACK Reserved
0xF4 L5IACK Reserved
0xF8 L6IACK Reserved
0xFC L7IACK Reserved
31 16
Field INT[63:48]
Reset 0000_0000_0000_0000
R/W R
15 0
Field INT[47:32]
Reset 0000_0000_0000_0000
R/W R
IPSBAR + 0xC00, 0xD00
Figure 10-1. Interrupt Pending Register High (IPRHn)
Table 10-3. Interrupt Controller Memory Map (continued)
Module Offset Bits[31:24] Bits[23:16] Bits[15:8] Bits[7:0]
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3