Datasheet

Clock Module
9-6 Freescale Semiconductor
9.6.2 Register Descriptions
This subsection provides a description of the clock module registers.
9.6.2.1 Synthesizer Control Register (SYNCR)
15 14 13 12 11 10 9 8
Field LOLRE MFD2 MFD1 MFD0 LOCRE RFD2 RFD1 RFD0
Reset 0010_0001
R/W R/W
76 5 4 3210
Field LOCEN DISCLK FWKUP — STPMD1 STPMD0 — —
Reset 0000_0000
R/W R/W R R/W R
Address IPSBAR + 0x0012_0000
Figure 9-3. Synthesizer Control Register (SYNCR)
Table 9-4. SYNCR Field Descriptions
Bit(s) Name Description
15 LOLRE Loss of lock reset enable. Determines how the system handles a loss of lock
indication. When operating in normal mode or 1:1 PLL mode, the PLL must be locked
before setting the LOLRE bit. Otherwise reset is immediately asserted. To prevent an
immediate reset, the LOLRE bit must be cleared before writing the MFD[2:0] bits or
entering stop mode with the PLL disabled.
1 Reset on loss of lock
0 No reset on loss of lock
Note: In external clock mode, the LOLRE bit has no effect.
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3