Datasheet

System Control Module (SCM)
8-16 Freescale Semiconductor
At reset, these on-chip modules are configured to have only supervisor read/write access capabilities. Bit
encodings for the ACCESS_CTRL field in the GPACR are shown in Table 8-13. Table 8-14 shows the
memory space protected by the GPACRs and the modules mapped to these spaces.
Table 8-12. GPACR Field Descriptions
Bits Name Description
7 LOCK This bit, once set, prevents subsequent writes to the GPACR. Any attempted write to the
GPACR generates an error termination and the contents of the register are not affected.
Only a system reset clears this flag.
6–4 — Reserved, should be cleared.
3–0 ACCESS_CTRL This 4-bit field defines the access control for the given memory region.
The encodings for this field are shown in Ta ble 8 -1 3.
Table 8-13. GPACR ACCESS_CTRL Bit Encodings
Bits Supervisor Mode User Mode
0000 Read / Write No Access
0001 Read No Access
0010 Read Read
0011 Read No Access
0100 Read / Write Read / Write
0101 Read / Write Read
0110 Read / Write Read / Write
0111 No Access No Access
1000 Read / Write / Execute No Access
1001 Read / Execute No Access
1010 Read / Execute Read / Execute
1011 Execute No Access
1100 Read / Write / Execute Read / Write / Execute
1101 Read / Write / Execute Read / Execute
1110 Read / Write Read
1111 Read / Write / Execute Execute
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3