Datasheet

System Control Module (SCM)
8-14 Freescale Semiconductor
and writes. Each PACR follows the format illustrated in Figure 8-9. For a list of PACRs and the modules
that they control, refer to Table 8-11.
76 432 0
Field LOCK1 ACCESS_CTRL1 LOCK0 ACCESS_CTRL0
Reset 0000_0000
R/W R/W
Address IPSBAR + 0x24 + Offset
Figure 8-9. Peripheral Access Control Register (PACRn)
Table 8-9. PACR Field Descriptions
Bits Name Description
7 LOCK1 This bit, when set, prevents subsequent writes to ACCESSCTRL1. Any attempted
write to the PACR generates an error termination and the contents of the register are
not affected. Only a system reset clears this flag.
6–4 ACCESS_CTRL1 This 3-bit field defines the access control for the given platform peripheral.
The encodings for this field are shown in Tabl e 8-1 0.
3 LOCK0 This bit, when set, prevents subsequent writes to ACCESSCTRL0. Any attempted
write to the PACR generates an error termination and the contents of the register are
not affected. Only a system reset clears this flag.
2–0 ACCESS_CTRL0 This 3-bit field defines the access control for the given platform peripheral.
The encodings for this field are shown in Tabl e 8-1 0.
Table 8-10. PACR ACCESSCTRL Bit Encodings
Bits Supervisor Mode User Mode
000 Read/Write No Access
001 Read No Access
010 Read Read
011 Read No Access
100 Read/Write Read/Write
101 Read/Write Read
110 Read/Write Read/Write
111 No Access No Access
Table 8-11. Peripheral Access Control Registers (PACRs)
IPSBAR Offset Name
Modules Controlled
ACCESS_CTRL1 ACCESS_CTRL0
0x024 PACR0 SCM SDRAMC
0x025 PACR1 EIM DMA
0x026 PACR2 UART0 UART1
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3