Datasheet
Chapter 4 Multiplexed External Bus Interface (MEBIV3)
Freescale Semiconductor MC9S12C-Family / MC9S12GC-Family 133
Rev 01.24
Detailed descriptions of these pins can be found in the device overview chapter.
4.3 Memory Map and Register Definition
A summary of the registers associated with the MEBI sub-block is shown in Table 4-2. Detailed
descriptions of the registers and bits are given in the subsections that follow. On most chips the registers
are mappable. Therefore, the upper bits may not be all 0s as shown in the table and descriptions.
PE4/ECLK PE4 General-purpose I/O pin, see PORTE and DDRE registers.
ECLK Bus timing reference clock, can operate as a free-running clock at the system
clock rate or to produce one low-high clock per visible access, with the high
period stretched for slow accesses. ECLK is controlled by the NECLK bit in
PEAR, the IVIS bit in MODE, and the ESTR bit in EBICTL.
PE3/
LSTRB/ TAGLO PE3 General-purpose I/O pin, see PORTE and DDRE registers.
LSTRB Low strobe bar, 0 indicates valid data on D7–D0.
SZ8 In special peripheral mode, this pin is an input indicating the size of the data
transfer (0 = 16-bit; 1 = 8-bit).
TAGLO In expanded wide mode or emulation narrow modes, when instruction tagging
is on and low strobe is enabled, a 0 at the falling edge of E tags the low half of
the instruction word being read into the instruction queue.
PE2/R/
W PE2 General-purpose I/O pin, see PORTE and DDRE registers.
R/
W Read/write, indicates the direction of internal data transfers. This is an output
except in special peripheral mode where it is an input.
PE1/
IRQ PE1 General-purpose input-only pin, can be read even if IRQ enabled.
IRQ Maskable interrupt request, can be level sensitive or edge sensitive.
PE0/
XIRQ PE0 General-purpose input-only pin.
XIRQ Non-maskable interrupt input.
PK7/
ECS PK7 General-purpose I/O pin, see PORTK and DDRK registers.
ECS Emulation chip select
PK6/
XCS PK6 General-purpose I/O pin, see PORTK and DDRK registers.
XCS External data chip select
PK5/X19
thru
PK0/X14
PK5–PK0 General-purpose I/O pins, see PORTK and DDRK registers.
X19–X14 Memory expansion addresses
Table 4-1. External System Pins Associated With MEBI (continued)
Pin Name Pin Functions Description