Datasheet

ManualsBrandsNXP SEMICONDUCTORS ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller QFP 80 (14x14) 16-Bit 25 MHz I/O number 59

571

572

573

574

575

576

577

578

579

580

Table Of Contents

List of Sections
Table of Contents
General Description
- Contents
- Introduction
- Features
- MC9S12DP256 112-Pin Block Diagram
- Ordering Information
Central Processing Unit (CPU)
- Contents
- Introduction
- Programming Model
- Data Types
- Addressing Modes
- Indexed Addressing Modes
- Opcodes and Operands
- Instruction Set Summary
Pinout and Signal Description
- Contents
- MC9S12DP256 Pin Assignments in 112-pin QFP
- Power Supply Pins
- Signal Descriptions
- Port Signals
System Configuration
- Contents
- Introduction
- Modules Variabilities
- MCU Variabilities
Registers
- Contents
- Register Block
Operating Modes
- Contents
- Introduction
- Operating Modes
- Background Debug Mode
- Security
Resource Mapping
- Contents
- Introduction
- Internal Resource Mapping
- Flash EEPROM mapping through internal Memory Expansion
- Miscellaneous System Control Register
- Memory Maps
Bus Control and Input/Output
- Contents
- Introduction
- Detecting Access Type from External Signals
- Stretched Bus Cycles
- PIPE Status Signals
- Registers
Resets and Interrupts
- Contents
- Introduction
- Register Map
- Exception Priority
- Maskable interrupts
- Latching of Interrupts
- Register Descriptions
- Resets
- Effects of Reset
- Register Stacking
Voltage Regulator (VREG)
- Contents
- Overview
- Features
- Block Diagram
- Functional Description
- External Pin Connection
- Reset Initialization
- Modes of Operation
Flash EEPROM 256K
- Contents
- Glossary
- Overview
- Features
- Block Diagram
- Module Memory Map
- Functional Description
- Register Descriptions
- External Pin Descriptions
- Reset Initialization
- Modes of Operation
- Low Power Options
- Interrupt Operation
EEPROM 4K
- Contents
- Glossary
- Overview
- Features
- Block Diagram
- Module Memory Map
- Functional Description
- Register Descriptions
- External Pin Descriptions
- Reset Initialization
- Modes of Operation
- Interrupt Operation
Port Integration Module
- Contents
- Overview
- Block Diagram
- External Pin Descriptions
- 80 Pin QFP bond-out version
- Register Map
- Register Descriptions
- Reset Initialization
- Functional Description
- Low Power Options
- Interrupt Operation
Clocks and Reset Generator (CRG)
- Contents
- Overview
- Features
- Block Diagram
- Register Map
- Functional Description
- Register Descriptions
- External Pin Descriptions
- Reset Initialization
- Interrupt Operation
- Low Power Options
Pulse Width Modulator (PWM)
- Contents
- Overview
- Features
- Block Diagram
- External Pin Descriptions
- Register Map
- Register Descriptions
- Functional Description
- Reset Initialization
- Modes of Operation
- Low Power Options
- Interrupt Operation
Enhanced Capture Timer (ECT)
- Contents
- Overview
- Features
- Modes of Operation
- Abbreviations
- Block Diagram
- Signal Descriptions
- Module Memory Map
- Register Quick Reference
- Register Descriptions
- Modes of Operation
- Interrupts
- Description of Interrupt Operation
Serial Communications Interface (SCI)
- Contents
- Overview
- Features
- Modes of Operation
- SCI Interface Diagram
- Block Diagram
- Signal Descriptions
- Module Memory Map
- Register Quick Reference
- Register Descriptions
- Functional Description
- Modes of Operation
- Interrupt Operation
Serial Peripheral Interface (SPI)
- Contents
- Overview
- Features
- Modes of Operation
- Block Diagram
- Signal Descriptions
- Module Memory Map
- Register Quick Reference
- Register Descriptions
- Functional Description
- Low Power Mode Options
- Errata
- Reset
- Interrupts
Inter-IC Bus (IIC)
- Contents
- Overview
- Features
- Modes of Operation
- Block Diagram
- Signal Descriptions
- Module Memory Map
- Register Quick Reference
- Register Descriptions
- I-Bus Protocol
- Interrupt Operation
- Modes of Operation
- Programming
MSCAN
- Contents
- Overview
- Features
- Block Diagram
- External Pin Descriptions
- Register Map
- Functional Description
- Register Descriptions
- Modes of Operation
- Low Power Options
- Interrupt Operation
Analog to Digital Converter
- Contents
- Overview
- Features
- Block Diagram
- Register Map
- Functional Description
- Register Descriptions
- External Pin Descriptions
- Reset Initialization
- Modes of Operation
- Sample Conversion
- General Purpose Input Ports
Byte Data Link Controller Module
- Contents
- Overview
- Features
- Block Diagram
- Register Map
- Functional Description
- Register Descriptions
- External Pin Descriptions
- Reset Initialization/Basic Operation
- Transmitting A Message
- Receiving A Message
- Transmitting An In-Frame Response (IFR)
- Receiving An In-Frame Response (IFR)
- Special BDLC Operations
- Modes of Operation
- Interrupt Operation
- Low Power Options
Background Debug Module (BDM)
- Contents
- Overview
- Interface Signals
- Registers
- Operation
- Modes of Operation
- Low-Power Options
- Interrupt Operation
Breakpoint (BKP) Module
- Contents
- Overview
- Features
- Block Diagram
- External Pin Descriptions
- Register Descriptions
- Functional Description
- Breakpoint Operating Modes
- Breakpoint Types
- Modes of Operation
- Low Power Options
- Reset Initialization
- Interrupt Operation
- General Purpose I/O Ports
Revision History
- Changes from Rev 1.0 to Rev 1.1
Glossary
Literature Updates
- Literature Distribution Centers
- Customer Focus Center
- Microcontroller Division’s Web Site

Analog to Digital Converter

MC9S12DP256 — Revision 1.1

Analog to Digital Converter

External trigger mode allows the user to synchronize sample and ATD

conversions processes with external events.

External Gated Continuous-Scan Mode is defined when the SCAN

and ETRIGLE bits are set. It allows the user to synchronize the

conversion process with external events and control the number of

conversion performed in sequence. The ETRIG active level initiates a

conversion and at the end of the conversion if the ETRIGE bit is active

another sample is initiated.

Note that the conversion results for the external trigger channel have

no meaning while external trigger mode is enabled.

ASCIE — ATD Sequence Complete Interrupt Enable

1 = Enables ATD interrupt on Sequence Complete.

0 = Disables ATD interrupt.

The sequence complete interrupt function signals the MCU when a

conversion sequence is complete. At this time, the result registers

contain the result data generated by the conversion sequence. If this

interrupt function is disabled, then the conversion complete flags must

be polled to determine when a conversion or a conversion sequence

is complete. Note that reset clears pending interrupts.

ASCIF — ATD Sequence Complete Interrupt Flag

1 = ATD sequence complete interrupt occurred.

0 = No ATD sequence complete interrupt occurred.

Table 97 Left Justiﬁed, Signed and Unsigned ATD Output Codes

Input Signal

Vrl = 0 Volts

Vrh = 5.12 Volts

Signed

8-Bit

Codes

Unsigned

8-Bit

Codes

Signed

10-Bit

Codes

Unsigned

10-Bit

Codes

5.120 Volts

5.100

5.080

2.580

2.560

2.540

0.020

0.000

7FC0

7F00

7E00

0100

0000

FF00

8100

8000

FFC0

FF00

FE00

8100

8000

7F00

0100

0000

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...