Datasheet

ManualsBrandsNXP SEMICONDUCTORS ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller QFP 80 (14x14) 16-Bit 25 MHz I/O number 59

221

222

223

224

225

226

227

228

229

230

Table Of Contents

List of Sections
Table of Contents
General Description
- Contents
- Introduction
- Features
- MC9S12DP256 112-Pin Block Diagram
- Ordering Information
Central Processing Unit (CPU)
- Contents
- Introduction
- Programming Model
- Data Types
- Addressing Modes
- Indexed Addressing Modes
- Opcodes and Operands
- Instruction Set Summary
Pinout and Signal Description
- Contents
- MC9S12DP256 Pin Assignments in 112-pin QFP
- Power Supply Pins
- Signal Descriptions
- Port Signals
System Configuration
- Contents
- Introduction
- Modules Variabilities
- MCU Variabilities
Registers
- Contents
- Register Block
Operating Modes
- Contents
- Introduction
- Operating Modes
- Background Debug Mode
- Security
Resource Mapping
- Contents
- Introduction
- Internal Resource Mapping
- Flash EEPROM mapping through internal Memory Expansion
- Miscellaneous System Control Register
- Memory Maps
Bus Control and Input/Output
- Contents
- Introduction
- Detecting Access Type from External Signals
- Stretched Bus Cycles
- PIPE Status Signals
- Registers
Resets and Interrupts
- Contents
- Introduction
- Register Map
- Exception Priority
- Maskable interrupts
- Latching of Interrupts
- Register Descriptions
- Resets
- Effects of Reset
- Register Stacking
Voltage Regulator (VREG)
- Contents
- Overview
- Features
- Block Diagram
- Functional Description
- External Pin Connection
- Reset Initialization
- Modes of Operation
Flash EEPROM 256K
- Contents
- Glossary
- Overview
- Features
- Block Diagram
- Module Memory Map
- Functional Description
- Register Descriptions
- External Pin Descriptions
- Reset Initialization
- Modes of Operation
- Low Power Options
- Interrupt Operation
EEPROM 4K
- Contents
- Glossary
- Overview
- Features
- Block Diagram
- Module Memory Map
- Functional Description
- Register Descriptions
- External Pin Descriptions
- Reset Initialization
- Modes of Operation
- Interrupt Operation
Port Integration Module
- Contents
- Overview
- Block Diagram
- External Pin Descriptions
- 80 Pin QFP bond-out version
- Register Map
- Register Descriptions
- Reset Initialization
- Functional Description
- Low Power Options
- Interrupt Operation
Clocks and Reset Generator (CRG)
- Contents
- Overview
- Features
- Block Diagram
- Register Map
- Functional Description
- Register Descriptions
- External Pin Descriptions
- Reset Initialization
- Interrupt Operation
- Low Power Options
Pulse Width Modulator (PWM)
- Contents
- Overview
- Features
- Block Diagram
- External Pin Descriptions
- Register Map
- Register Descriptions
- Functional Description
- Reset Initialization
- Modes of Operation
- Low Power Options
- Interrupt Operation
Enhanced Capture Timer (ECT)
- Contents
- Overview
- Features
- Modes of Operation
- Abbreviations
- Block Diagram
- Signal Descriptions
- Module Memory Map
- Register Quick Reference
- Register Descriptions
- Modes of Operation
- Interrupts
- Description of Interrupt Operation
Serial Communications Interface (SCI)
- Contents
- Overview
- Features
- Modes of Operation
- SCI Interface Diagram
- Block Diagram
- Signal Descriptions
- Module Memory Map
- Register Quick Reference
- Register Descriptions
- Functional Description
- Modes of Operation
- Interrupt Operation
Serial Peripheral Interface (SPI)
- Contents
- Overview
- Features
- Modes of Operation
- Block Diagram
- Signal Descriptions
- Module Memory Map
- Register Quick Reference
- Register Descriptions
- Functional Description
- Low Power Mode Options
- Errata
- Reset
- Interrupts
Inter-IC Bus (IIC)
- Contents
- Overview
- Features
- Modes of Operation
- Block Diagram
- Signal Descriptions
- Module Memory Map
- Register Quick Reference
- Register Descriptions
- I-Bus Protocol
- Interrupt Operation
- Modes of Operation
- Programming
MSCAN
- Contents
- Overview
- Features
- Block Diagram
- External Pin Descriptions
- Register Map
- Functional Description
- Register Descriptions
- Modes of Operation
- Low Power Options
- Interrupt Operation
Analog to Digital Converter
- Contents
- Overview
- Features
- Block Diagram
- Register Map
- Functional Description
- Register Descriptions
- External Pin Descriptions
- Reset Initialization
- Modes of Operation
- Sample Conversion
- General Purpose Input Ports
Byte Data Link Controller Module
- Contents
- Overview
- Features
- Block Diagram
- Register Map
- Functional Description
- Register Descriptions
- External Pin Descriptions
- Reset Initialization/Basic Operation
- Transmitting A Message
- Receiving A Message
- Transmitting An In-Frame Response (IFR)
- Receiving An In-Frame Response (IFR)
- Special BDLC Operations
- Modes of Operation
- Interrupt Operation
- Low Power Options
Background Debug Module (BDM)
- Contents
- Overview
- Interface Signals
- Registers
- Operation
- Modes of Operation
- Low-Power Options
- Interrupt Operation
Breakpoint (BKP) Module
- Contents
- Overview
- Features
- Block Diagram
- External Pin Descriptions
- Register Descriptions
- Functional Description
- Breakpoint Operating Modes
- Breakpoint Types
- Modes of Operation
- Low Power Options
- Reset Initialization
- Interrupt Operation
- General Purpose I/O Ports
Revision History
- Changes from Rev 1.0 to Rev 1.1
Glossary
Literature Updates
- Literature Distribution Centers
- Customer Focus Center
- Microcontroller Division’s Web Site

Port Integration Module

MC9S12DP256 — Revision 1.1

Port Integration Module

Port T Reduced

Drive Register

(RDRT)

Read: Anytime.

Write: Anytime.

This register configures the drive strength of each port T output pin as

either full or reduced. If the port is used as input this bit is ignored.

RDRT[7:0] — Reduced Drive Port T

1 = Associated pin drives at about 1/3 of the full drive strength.

0 = Full drive strength at output.

Port T Pull Device

Enable Register

(PERT)

Read: Anytime.

Write: Anytime.

This register configures whether a pull-up or a pull-down device is

activated, if the port is used as input. This bit has no effect if the port is

used as output. Out of reset no pull device is enabled.

PERT[7:0] — Pull Device Enable Port T

1 = Either a pull-up or pull-down device is enabled.

0 = Pull-up or pull-down device is disabled.

Address Offset: $0003

Bit 7 654321Bit 0

Read:

RDRT7 RDRT6 RDRT5 RDRT4 RDRT3 RDRT2 RDRT1 RDRT0

Write:

Reset: 00000000

= Reserved or unimplemented

Address Offset: $0004

Bit 7 654321Bit 0

Read:

PERT7 PERT6 PERT5 PERT4 PERT3 PERT2 PERT1 PERT0

Write:

Reset: 00000000

= Reserved or unimplemented

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...