Datasheet

ManualsBrandsNXP SEMICONDUCTORS ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller QFP 80 (14x14) 16-Bit 25 MHz I/O number 59

Table Of Contents

List of Sections
Table of Contents
General Description
- Contents
- Introduction
- Features
- MC9S12DP256 112-Pin Block Diagram
- Ordering Information
Central Processing Unit (CPU)
- Contents
- Introduction
- Programming Model
- Data Types
- Addressing Modes
- Indexed Addressing Modes
- Opcodes and Operands
- Instruction Set Summary
Pinout and Signal Description
- Contents
- MC9S12DP256 Pin Assignments in 112-pin QFP
- Power Supply Pins
- Signal Descriptions
- Port Signals
System Configuration
- Contents
- Introduction
- Modules Variabilities
- MCU Variabilities
Registers
- Contents
- Register Block
Operating Modes
- Contents
- Introduction
- Operating Modes
- Background Debug Mode
- Security
Resource Mapping
- Contents
- Introduction
- Internal Resource Mapping
- Flash EEPROM mapping through internal Memory Expansion
- Miscellaneous System Control Register
- Memory Maps
Bus Control and Input/Output
- Contents
- Introduction
- Detecting Access Type from External Signals
- Stretched Bus Cycles
- PIPE Status Signals
- Registers
Resets and Interrupts
- Contents
- Introduction
- Register Map
- Exception Priority
- Maskable interrupts
- Latching of Interrupts
- Register Descriptions
- Resets
- Effects of Reset
- Register Stacking
Voltage Regulator (VREG)
- Contents
- Overview
- Features
- Block Diagram
- Functional Description
- External Pin Connection
- Reset Initialization
- Modes of Operation
Flash EEPROM 256K
- Contents
- Glossary
- Overview
- Features
- Block Diagram
- Module Memory Map
- Functional Description
- Register Descriptions
- External Pin Descriptions
- Reset Initialization
- Modes of Operation
- Low Power Options
- Interrupt Operation
EEPROM 4K
- Contents
- Glossary
- Overview
- Features
- Block Diagram
- Module Memory Map
- Functional Description
- Register Descriptions
- External Pin Descriptions
- Reset Initialization
- Modes of Operation
- Interrupt Operation
Port Integration Module
- Contents
- Overview
- Block Diagram
- External Pin Descriptions
- 80 Pin QFP bond-out version
- Register Map
- Register Descriptions
- Reset Initialization
- Functional Description
- Low Power Options
- Interrupt Operation
Clocks and Reset Generator (CRG)
- Contents
- Overview
- Features
- Block Diagram
- Register Map
- Functional Description
- Register Descriptions
- External Pin Descriptions
- Reset Initialization
- Interrupt Operation
- Low Power Options
Pulse Width Modulator (PWM)
- Contents
- Overview
- Features
- Block Diagram
- External Pin Descriptions
- Register Map
- Register Descriptions
- Functional Description
- Reset Initialization
- Modes of Operation
- Low Power Options
- Interrupt Operation
Enhanced Capture Timer (ECT)
- Contents
- Overview
- Features
- Modes of Operation
- Abbreviations
- Block Diagram
- Signal Descriptions
- Module Memory Map
- Register Quick Reference
- Register Descriptions
- Modes of Operation
- Interrupts
- Description of Interrupt Operation
Serial Communications Interface (SCI)
- Contents
- Overview
- Features
- Modes of Operation
- SCI Interface Diagram
- Block Diagram
- Signal Descriptions
- Module Memory Map
- Register Quick Reference
- Register Descriptions
- Functional Description
- Modes of Operation
- Interrupt Operation
Serial Peripheral Interface (SPI)
- Contents
- Overview
- Features
- Modes of Operation
- Block Diagram
- Signal Descriptions
- Module Memory Map
- Register Quick Reference
- Register Descriptions
- Functional Description
- Low Power Mode Options
- Errata
- Reset
- Interrupts
Inter-IC Bus (IIC)
- Contents
- Overview
- Features
- Modes of Operation
- Block Diagram
- Signal Descriptions
- Module Memory Map
- Register Quick Reference
- Register Descriptions
- I-Bus Protocol
- Interrupt Operation
- Modes of Operation
- Programming
MSCAN
- Contents
- Overview
- Features
- Block Diagram
- External Pin Descriptions
- Register Map
- Functional Description
- Register Descriptions
- Modes of Operation
- Low Power Options
- Interrupt Operation
Analog to Digital Converter
- Contents
- Overview
- Features
- Block Diagram
- Register Map
- Functional Description
- Register Descriptions
- External Pin Descriptions
- Reset Initialization
- Modes of Operation
- Sample Conversion
- General Purpose Input Ports
Byte Data Link Controller Module
- Contents
- Overview
- Features
- Block Diagram
- Register Map
- Functional Description
- Register Descriptions
- External Pin Descriptions
- Reset Initialization/Basic Operation
- Transmitting A Message
- Receiving A Message
- Transmitting An In-Frame Response (IFR)
- Receiving An In-Frame Response (IFR)
- Special BDLC Operations
- Modes of Operation
- Interrupt Operation
- Low Power Options
Background Debug Module (BDM)
- Contents
- Overview
- Interface Signals
- Registers
- Operation
- Modes of Operation
- Low-Power Options
- Interrupt Operation
Breakpoint (BKP) Module
- Contents
- Overview
- Features
- Block Diagram
- External Pin Descriptions
- Register Descriptions
- Functional Description
- Breakpoint Operating Modes
- Breakpoint Types
- Modes of Operation
- Low Power Options
- Reset Initialization
- Interrupt Operation
- General Purpose I/O Ports
Revision History
- Changes from Rev 1.0 to Rev 1.1
Glossary
Literature Updates
- Literature Distribution Centers
- Customer Focus Center
- Microcontroller Division’s Web Site

MC9S12DP256 — Revision 1.1

General Description

Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

MC9S12DP256 112-Pin Block Diagram . . . . . . . . . . . . . . . . . . . . . . . 16

Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Introduction

The MC9S12DP256 microcontroller unit (MCU) is a 16-bit device

composed of standard on-chip peripherals including a 16-bit central

processing unit (STAR12 CPU), 256K bytes of Flash EEPROM, 12.0K

bytes of RAM, 4.0K bytes of EEPROM, 2 asynchronous serial

communications interfaces (SCI), three serial peripheral interfaces

(SPI), an 8 channel IC/OC enhanced capture timer, two 8-channel,

10-bit analog-to-digital converters (ADC), an 8-channel pulse-width

modulator (PWM), a digital Byte Data Link Controller (BDLC), 29

discrete digital I/O channels (Port A, Port B, Port K and Port E), 20

discrete digital I/O lines with interrupt and wakeup capability, five CAN

2.0 A, B software compatible modules (MSCAN12), and an Inter-IC Bus.

System resource mapping, clock generation, interrupt control and bus

interfacing are managed by the System Integration Module (SIM). The

MC9S12DP256 has full 16-bit data paths throughout. However, the

external bus can operate in an 8-bit narrow mode so single 8-bit wide

memory can be interfaced for lower cost systems. The inclusion of a PLL

circuit allows power consumption and performance to be adjusted to suit

operational requirements.

NOTE:

The main body of this document refers to the 112-pin version of the

device. Pins shown in bold on the block diagram and pinout are not

available on the 80-pin version.

Freescale Semiconductor, I

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

nc...