Datasheet

Break Module (BRK)
Technical Data MC68HC908LJ12 — Rev. 2.1
390 Break Module (BRK) Freescale Semiconductor
22.6.4 SIM Break Flag Control Register
The SIM break flag control register (SBFCR) contains a bit that enables
software to clear status bits while the MCU is in a break state.
BCFE — Break Clear Flag Enable Bit
This read/write bit enables software to clear status bits by accessing
status registers while the MCU is in a break state. To clear status bits
during the break state, the BCFE bit must be set.
1 = Status bits clearable during break
0 = Status bits not clearable during break
Address: $FE03
Bit 7654321Bit 0
Read:
BCFERRRRRRR
Write:
Reset: 0
R= Reserved
Figure 22-7. SIM Break Flag Control Register (SBFCR)