Datasheet

Infrared Serial Communications Interface Module (IRSCI)
MC68HC908LJ12 — Rev. 2.1 Technical Data
Freescale Semiconductor Infrared Serial Communications Interface Module (IRSCI) 263
13.11.6 SCI Data Register (SCDR)
The SCI data register is the buffer between the internal data bus and the
receive and transmit shift registers. Reset has no effect on data in the
SCI data register.
R7/T7–R0/T0 — Receive/Transmit Data Bits
Reading the SCDR accesses the read-only received data bits,
R7–R0. Writing to the SCDR writes the data to be transmitted, T7–T0.
Reset has no effect on SCDR.
NOTE: Do not use read/modify/write instructions on the SCI data register.
Address: $0018
Bit 7654321Bit 0
Read: R7 R6 R5 R4 R3 R2 R1 R0
Write: T7 T6 T5 T4 T3 T2 T1 T0
Reset: Unaffected by reset
Figure 13-18. SCI Data Register (SCDR)