Datasheet

Monitor ROM (MON)
MC68HC908LJ12 — Rev. 2.1 Technical Data
Freescale Semiconductor Monitor ROM (MON) 179
10.6.6 MON_LDRNGE
In monitor mode, LDRNGE is used to load the data array in RAM with
data from a range of FLASH locations.
The MON_LDRNGE routine is designed to be used in monitor mode. It
performs the same function as the LDRNGE routine (see 10.6.3
LDRNGE), except that MON_LDRNGE returns to the main program via
an SWI instruction. After a MON_LDRNGE call, the SWI instruction will
return the control back to the monitor code.
Table 10-16. ICP_LDRNGE Routine
Routine Name MON_LDRNGE
Routine Description Loads data from a range of locations, in monitor mode
Calling Address $FF24
Stack Used 11 bytes
Data Block Format Bus speed
Data size
Starting address (high byte)
Starting address (low byte)
Data 1
:
Data N