Datasheet

System Integration Module (SIM)
Technical Data MC68HC908LJ12 — Rev. 2.1
142 System Integration Module (SIM) Freescale Semiconductor
9.6 Exception Control
Normal, sequential program execution can be changed in three different
ways:
• Interrupts:
– Maskable hardware CPU interrupts
– Non-maskable software interrupt instruction (SWI)
• Reset
• Break interrupts
9.6.1 Interrupts
At the beginning of an interrupt, the CPU saves the CPU register
contents on the stack and sets the interrupt mask (I bit) to prevent
additional interrupts. At the end of an interrupt, the RTI instruction
recovers the CPU register contents from the stack so that normal
processing can resume. Figure 9-8 shows interrupt entry timing, and
Figure 9-9 shows interrupt recovery timing.
Figure 9-8. Interrupt Entry Timing
Figure 9-9. Interrupt Recovery Timing
MODULE
IDB
R/W
INTERRUPT
DUMMY
SP SP – 1 SP – 2 SP – 3 SP – 4 VECT H VECT L START ADDR
IAB
DUMMY PC – 1[7:0] PC – 1[15:8] X A CCR V DATA H V DATA L OPCODE
I-BIT
MODULE
IDB
R/W
INTERRUPT
SP – 4 SP – 3 SP – 2 SP – 1 SP PC PC + 1
IAB
CCR A X PC – 1[15:8] PC – 1[7:0] OPCODE OPERAND
I-BIT