Datasheet

System Integration Module (SIM)
MC68HC908QY/QT Family Data Sheet, Rev. 6
118 Freescale Semiconductor
13.8.2 Break Flag Control Register
The break control register (BFCR) contains a bit that enables software to clear status bits while the MCU
is in a break state.
BCFE — Break Clear Flag Enable Bit
This read/write bit enables software to clear status bits by accessing status registers while the MCU is
in a break state. To clear status bits during the break state, the BCFE bit must be set.
1 = Status bits clearable during break
0 = Status bits not clearable during break
Address:
$FE03
Bit 7654321Bit 0
Read:
BCFERRRRRRR
Write:
Reset: 0
R
= Reserved
Figure 13-20. Break Flag Control Register (BFCR)