Datasheet

Break Module (BRK)
Technical Data MC68HC908GR8 — Rev 4.0
98 Break Module (BRK) MOTOROLA
6.6.4 Break Flag Control Register
The break flag control register (SBFCR) contains a bit that enables
software to clear status bits while the MCU is in a break state.
BCFE — Break Clear Flag Enable Bit
This read/write bit enables software to clear status bits by accessing
status registers while the MCU is in a break state. To clear status bits
during the break state, the BCFE bit must be set.
1 = Status bits clearable during break
0 = Status bits not clearable during break
Address: $FE03
Bit 7654321Bit 0
Read:
BCFERRRRRRR
Write:
Reset: 0
R= Reserved
Figure 6-7. SIM Break Flag Control Register (SBFCR)
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...