Datasheet

Serial Peripheral Interface (SPI)
Technical Data MC68HC908GR8 — Rev 4.0
328 Serial Peripheral Interface (SPI) MOTOROLA
20.14.3 SPI Data Register
The SPI data register consists of the read-only receive data register and
the write-only transmit data register. Writing to the SPI data register
writes data into the transmit data register. Reading the SPI data register
reads data from the receive data register. The transmit data and receive
data registers are separate registers that can contain different values.
See Figure 20-2.
R7–R0/T7–T0 — Receive/Transmit Data Bits
NOTE: Do not use read-modify-write instructions on the SPI data register since
the register read is not the same as the register written.
Address: $0012
Bit 7654321Bit 0
Read: R7 R6 R5 R4 R3 R2 R1 R0
Write: T7 T6 T5 T4 T3 T2 T1 T0
Reset: Indeterminate after reset
Figure 20-15. SPI Data Register (SPDR)
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...