Datasheet

Specifications
MC56F825x/MC56F824x Digital Signal Controller, Rev. 3
Freescale Semiconductor 55
7.7 Supply Current Characteristics
The following table specifies supply current characteristics.
Table 24. Current Consumption
Mode Conditions
Typical @ 3.3 V
25°C
(mA)
Maximum @ 3.6 V
105°C,125°C
(mA)
I
DD
1
1
No output switching
All ports configured as inputs
All inputs low
No DC loads
I
DDA
I
DD
1
I
DDA
RUN 60 MHz device clock
Relaxation oscillator on
PLL powered on
Continuous MAC instructions with fetches from
program flash memory
All peripheral modules enabled; TMRs and SCIs
using 1X Clock
ADC/DAC powered on and clocked
Comparator powered on
92 38 97 44
WAIT 60 MHz device clock
Relaxation oscillator on
PLL powered on
Processor core in WAIT state
All peripheral modules enabled; TMRs and SCIs
using 1X Clock
ADC/DAC/comparator powered off
49 4.5 53 5.5
STOP 4 MHz device clock
Relaxation oscillator on
PLL powered off
Processor core in STOP state
All peripheral module and core clocks are off
ADC/DAC/comparator powered off
8.0 3.6 9.2 4.9
STANDBY >
STOP
100 kHz device clock
Relaxation oscillator in standby mode
PLL powered off
Processor core in STOP state
All peripheral module and core clocks are off
ADC/DAC/comparator powered off
Voltage regulator in standby mode
0.76 0 3.0 0
POWERDOWN Device clock is off
Relaxation oscillator powered off
PLL powered off
Processor core in STOP state
All peripheral module and core clocks are off
ADC /DAC/comparator powered off
Voltage regulator in standby mode
0.66 0 2.0 0