Datasheet

Table Of Contents
56F8035/56F8025 Data Sheet, Rev. 6
24 Freescale Semiconductor
GPIOA4
(PWM4)
(TA2
1
)
(FAULT1
2
)
31 Input/
Output
Output
Input/
Output
Input
Input,
internal
pull-up
enabled
Port A GPIO — This GPIO pin can be individually programmed as
an input or output pin.
PWM4 — This is one of the six PWM output pins.
TA2 — Timer A, Channel 2
Fault1 — This fault input pin is used for disabling selected PWM
outputs in cases where fault conditions originate off-chip.
After reset, the default state is GPIOA4. The peripheral functionality
is controlled via the SIM. See Section 6.3.16.
1
The TA2 signal is also brought out on the GPIOA8-9 and GPIOB2-3 pins.
2
The Fault1 signal is also brought out on the GPIOA8-9 and GPIOB10 pins.
GPIOA5
(PWM5)
(TA3
3
)
(FAULT2
4
)
27 Input/
Output
Output
Input/
Output
Input
Input,
internal
pull-up
enabled
Port A GPIO — This GPIO pin can be individually programmed as
an input or output pin.
PWM5 — This is one of the six PWM output pins.
TA3 — Timer A, Channel 3
Fault2 — This fault input pin is used for disabling selected PWM
outputs in cases where fault conditions originate off-chip.
After reset, the default state is GPIOA5. The peripheral functionality
is controlled via the SIM. See Section 6.3.16.
3
The TA3 signal is also brought out on the GPIOA8-9 and GPIOB2-3 pins.
4
The Fault2 signal is also brought out on the GPIOA8-9 and GPIOB10 pins.
Return to Table 2-2
Table 2-3 56F8035/56F8025 Signal and Package Information for the 44-Pin LQFP
Signal
Name
LQFP
Pin No.
Type
State During
Reset
Signal Description