Datasheet

56F8033/56F8023 Data Sheet, Rev. 6
24 Freescale Semiconductor
GPIOA5
(PWM5)
(TA3
3
)
(FAULT2
4
)
20 Input/
Output
Output
Input/
Output
Input
Input,
internal
pull-up
enabled
Port A GPIO — This GPIO pin can be individually programmed as
an input or output pin.
PWM5 — This is one of the six PWM output pins.
TA3 — Timer A, Channel 3
Fault2 — This fault input pin is used for disabling selected PWM
outputs in cases where fault conditions originate off-chip.
After reset, the default state is GPIOA5. The peripheral functionality
is controlled via the SIM. See Section 6.3.16.
3
The TA3 signal is also brought out on the GPIOB2-3 pin.
4
The Fault2 signal is also brought out on the GPIOB4 pin.
GPIOA6
(FAULT0)
(TA0
5
)
18 Input/
Output
Input
Input,
internal
pull-up
enabled
Port A GPIO — This GPIO pin can be individually programmed as
an input or output pin.
Fault0 — This fault input pin is used for disabling selected PWM
outputs in cases where fault conditions originate off-chip.
TA0 — Timer A, Channel 0.
After reset, the default state is GPIOA6. The peripheral functionality
is controlled via the SIM. See Section 6.3.16.
5
The TA0 signal is also brought out on the GPIOB4 pin.
Return to Table 2-2
Table 2-3 56F8033/56F8023 Signal and Package Information for the 32-Pin LQFP
Signal
Name
LQFP
Pin No.
Type
State During
Reset
Signal Description