Datasheet

DC Electrical Characteristics
56F8033/56F8023 Data Sheet, Rev. 6
Freescale Semiconductor 121
Figure 10-1 I
IN
/I
OZ
vs. V
IN
(Typical; Pull-Up Disabled)
Table 10-6 Current Consumption per Power Supply Pin
Mode Conditions
Typical @ 3.3V, 25°C Maximum@ 3.6V, 25°C
I
DD
1
I
DDA
I
DD
1
I
DDA
RUN 32MHz Device Clock
Relaxation Oscillator on
PLL powered on
Continuous MAC instructions with fetches from
Program Flash
All peripheral modules enabled. TMR and PWM
using 1X Clock
ADC/DAC powered on and clocked
Comparator powered on
48mA 18.8mA
WAIT 32MHz Device Clock
Relaxation Oscillator on
PLL powered on
Processor Core in WAIT state
All Peripheral modules enabled. TMR and PWM
using 1X Clock
ADC/DAC/Comparator powered off
29mA 0μA—
STOP 4MHz Device Clock
Relaxation Oscillator on
PLL powered off
Processor Core in STOP state
All peripheral module and core clocks are off
ADC/DAC/Comparator powered off
5.4mA A—
2.0
0.0
- 2.0
- 4.0
- 6.0
- 8.0
- 10.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 6.0
3.54.04.55.05.5
µA
Volt