Datasheet

LPC82x All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 1 — 1 October 2014 35 of 81
NXP Semiconductors
LPC82x
32-bit ARM Cortex-M0+ microcontroller
[1] Typical ratings are not guaranteed. The values listed are for room temperature (25 C), nominal supply voltages.
[2] T
amb
=25C.
[3] I
DD
measurements were performed with all pins configured as GPIO outputs driven LOW and pull-up resistors disabled.
[4] IRC enabled; system oscillator disabled; system PLL disabled.
[5] System oscillator enabled; IRC disabled; system PLL disabled.
[6] BOD disabled.
[7] All peripherals disabled in the SYSAHBCLKCTRL register. Peripheral clocks to USART, CLKOUT, and IOCON disabled in system
configuration block.
[8] IRC enabled; system oscillator disabled; system PLL enabled.
[9] IRC disabled; system oscillator enabled; system PLL enabled.
[10] All oscillators and analog blocks turned off.
[11] WAKEUP pin pulled HIGH externally.
I
DD
supply current Deep power-down mode; V
DD
=
3.3 V; 10 kHz low-power oscillator
and self-wake-up timer (WKT)
enabled
-1.1-A
Deep power-down mode; V
DD
=
3.3 V; external clock input
WKTCLKIN @ 10 kHz with
self-wake-up timer enabled
-0.4-A
Deep power-down mode; V
DD
=
3.3 V; external clock input
WKTCLKIN @ 32 kHz with
self-wake-up timer enabled
-0.7-A
Table 8. Static characteristics, supply pins
…continued
T
amb
=  40  C to +105  C, unless otherwise specified.
Symbol Parameter Conditions Min Typ
[1]
Max Unit