Datasheet

xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx
LPC408X_7X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved. Product data sheet Rev. 3.1 — 1 September 2014 34 of 138 NXP Semiconductors
LPC408x/7x
32-bit ARM Cortex-M4 microcontroller
P2[7] 136 G16 G11 95 66 51 D9
[3]
I; PU I/O P2[7] — General purpose digital input/output pin.
I CAN_RD2 — CAN2 receiver input.
O U1_RTS — Request to Send output for UART1. Can also
be configured to be an RS-485/EIA-485 output enable
signal for UART1.
- R — Function reserved.
- R — Function reserved.
O SPIFI_CS
— Chip select output for SPIFI.
O LCD_VD[1] — LCD data.
O LCD_VD[5] — LCD data.
P2[8] 134 H15 G14 93 65 50 E9
[3]
I; PU I/O P2[8] — General purpose digital input/output pin.
O CAN_TD2 — CAN2 transmitter output.
O U2_TXD — Transmitter output for UART2.
I U1_CTS — Clear to Send input for UART1.
O ENET_MDC — Ethernet MIIM clock.
- R — Function reserved.
O LCD_VD[2] — LCD data.
O LCD_VD[6] — LCD data.
Table 3. Pin description
…continued
Not all functions are available on all parts. See Table 2 (Ethernet, USB, LCD, QEI, SD/MMC, comparator pins) and Table 5 (EMC pins).
Symbol
Pin LQFP208 Ball TFBGA208 Ball TFBGA180 Pin LQFP144 Pin LQFP100 Pin LQFP80 Pin TFBGA80 Reset state
[1]
Type
[2]
Description