Datasheet

xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx
LPC408X_7X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved. Product data sheet Rev. 3.1 — 1 September 2014 28 of 138 NXP Semiconductors
LPC408x/7x
32-bit ARM Cortex-M4 microcontroller
P1[24] 78 T9 P7 54 38 30 J6
[3]
I; PU I/O P1[24] — General purpose digital input/output pin.
I USB_RX_DM1 — D receive data for USB port 1 (OTG
transceiver).
O PWM1[5] — Pulse Width Modulator 1, channel 5 output.
I QEI_IDX — Quadrature Encoder Interface INDEX input.
I MC_FB2 — Motor control PWM channel 2 feedback input.
I/O SSP0_MOSI — Master Out Slave in for SSP0.
O LCD_VD[10] — LCD data.
O LCD_VD[14] — LCD data.
P1[25] 80T10L7563931K6
[3]
I; PU I/O P1[25] — General purpose digital input/output pin.
O USB_LS1
— Low Speed status for USB port 1 (OTG
transceiver).
O USB_HSTEN1
— Host Enabled status for USB port 1.
O T1_MAT1 — Match output for Timer 1, channel 1.
O MC_1A — Motor control PWM channel 1, output A.
O CLKOUT — Selectable clock output.
O LCD_VD[11] — LCD data.
O LCD_VD[15] — LCD data.
P1[26] 82 R10 P8 57 40 32 H6
[3]
I; PU I/O P1[26] — General purpose digital input/output pin.
O USB_SSPND1
— USB port 1 Bus Suspend status (OTG
transceiver).
O PWM1[6] — Pulse Width Modulator 1, channel 6 output.
I T0_CAP0 — Capture input for Timer 0, channel 0.
O MC_1B — Motor control PWM channel 1, output B.
I/O SSP1_SSEL — Slave Select for SSP1.
O LCD_VD[12] — LCD data.
O LCD_VD[20] — LCD data.
Table 3. Pin description
…continued
Not all functions are available on all parts. See Table 2 (Ethernet, USB, LCD, QEI, SD/MMC, comparator pins) and Table 5 (EMC pins).
Symbol
Pin LQFP208 Ball TFBGA208 Ball TFBGA180 Pin LQFP144 Pin LQFP100 Pin LQFP80 Pin TFBGA80 Reset state
[1]
Type
[2]
Description