Datasheet

xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx
LPC408X_7X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved. Product data sheet Rev. 3.1 — 1 September 2014 27 of 138 NXP Semiconductors
LPC408x/7x
32-bit ARM Cortex-M4 microcontroller
P1[22] 74 U8 M6 51 36 28 K5
[3]
I; PU I/O P1[22] — General purpose digital input/output pin.
I USB_RCV1 — Differential receive data for USB port 1
(OTG transceiver).
I USB_PWRD1 — Power Status for USB port 1 (host power
switch).
O T1_MAT0 — Match output for Timer 1, channel 0.
O MC_0B — Motor control PWM channel 0, output B.
I/O SSP1_MOSI — Master Out Slave In for SSP1.
O LCD_VD[8] — LCD data.
O LCD_VD[12] — LCD data.
P1[23] 76 P9 N7 53 37 29 H5
[3]
I; PU I/O P1[23] — General purpose digital input/output pin.
I USB_RX_DP1 — D+ receive data for USB port 1 (OTG
transceiver).
O PWM1[4] — Pulse Width Modulator 1, channel 4 output.
I QEI_PHB — Quadrature Encoder Interface PHB input.
I MC_FB1 — Motor control PWM channel 1 feedback input.
I/O SSP0_MISO — Master In Slave Out for SSP0.
O LCD_VD[9] — LCD data.
O LCD_VD[13] — LCD data.
Table 3. Pin description
…continued
Not all functions are available on all parts. See Table 2 (Ethernet, USB, LCD, QEI, SD/MMC, comparator pins) and Table 5 (EMC pins).
Symbol
Pin LQFP208 Ball TFBGA208 Ball TFBGA180 Pin LQFP144 Pin LQFP100 Pin LQFP80 Pin TFBGA80 Reset state
[1]
Type
[2]
Description