Datasheet

xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx
LPC408X_7X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved. Product data sheet Rev. 3.1 — 1 September 2014 21 of 138 NXP Semiconductors
LPC408x/7x
32-bit ARM Cortex-M4 microcontroller
P1[0] 196 A3 B5 136 95 76 A3
[3]
I; PU I/O P1[0] — General purpose digital input/output pin.
O ENET_TXD0 — Ethernet transmit data 0 (RMII/MII
interface).
- R — Function reserved.
I T3_CAP1 — Capture input for Timer 3, channel 1.
I/O SSP2_SCK — Serial clock for SSP2.
P1[1] 194 B5 A5 135 94 75 B4
[3]
I; PU I/O P1[1] — General purpose digital input/output pin.
O ENET_TXD1 — Ethernet transmit data 1 (RMII/MII
interface).
- R — Function reserved.
O T3_MAT3 — Match output for Timer 3, channel 3.
I/O SSP2_MOSI — Master Out Slave In for SSP2.
P1[2] 185 D9 B7 - - - -
[3]
I; PU I/O P1[2] — General purpose digital input/output pin.
O ENET_TXD2 — Ethernet transmit data 2 (MII interface).
O SD_CLK — Clock output line for SD card interface.
O PWM0[1] — Pulse Width Modulator 0, output 1.
P1[3] 177 A10 A9 - - - -
[3]
I; PU I/O P1[3] — General purpose digital input/output pin.
O ENET_TXD3 — Ethernet transmit data 3 (MII interface).
I/O SD_CMD — Command line for SD card interface.
O PWM0[2] — Pulse Width Modulator 0, output 2.
P1[4] 192 A5 C6 133 93 74 B5
[3]
I; PU I/O P1[4] — General purpose digital input/output pin.
O ENET_TX_EN — Ethernet transmit data enable (RMII/MII
interface).
- R — Function reserved.
O T3_MAT2 — Match output for Timer 3, channel 2.
I/O SSP2_MISO — Master In Slave Out for SSP2.
Table 3. Pin description
…continued
Not all functions are available on all parts. See Table 2 (Ethernet, USB, LCD, QEI, SD/MMC, comparator pins) and Table 5 (EMC pins).
Symbol
Pin LQFP208 Ball TFBGA208 Ball TFBGA180 Pin LQFP144 Pin LQFP100 Pin LQFP80 Pin TFBGA80 Reset state
[1]
Type
[2]
Description