Datasheet

xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx
LPC408X_7X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved. Product data sheet Rev. 3.1 — 1 September 2014 19 of 138 NXP Semiconductors
LPC408x/7x
32-bit ARM Cortex-M4 microcontroller
P0[23] 18 H1 F5 13 9 - -
[5]
I; PU I/O P0[23] — General purpose digital input/output pin.
I ADC0_IN[0] — A/D converter 0, input 0. When configured
as an ADC input, the digital function of the pin must be
disabled.
I/O I2S_RX_SCK — Receive Clock. It is driven by the master
and received by the slave. Corresponds to the signal SCK
in the I
2
S-bus specification.
I T3_CAP0 — Capture input for Timer 3, channel 0.
P0[24] 16 G2 E1 11 8 - -
[5]
I; PU I/O P0[24] — General purpose digital input/output pin.
I ADC0_IN[1] — A/D converter 0, input 1. When configured
as an ADC input, the digital function of the pin must be
disabled.
I/O I2S_RX_WS — Receive Word Select. It is driven by the
master and received by the slave. Corresponds to the
signal WS in the I
2
S-bus specification.
I T3_CAP1 — Capture input for Timer 3, channel 1.
P0[25] 14 F1 E4 10 7 7 D1
[5]
I; PU I/O P0[25] — General purpose digital input/output pin.
I ADC0_IN[2] — A/D converter 0, input 2. When configured
as an ADC input, the digital function of the pin must be
disabled.
I/O I2S_RX_SDA — Receive data. It is driven by the
transmitter and read by the receiver. Corresponds to the
signal SD in the I
2
S-bus specification.
O U3_TXD — Transmitter output for UART3.
Table 3. Pin description
…continued
Not all functions are available on all parts. See Table 2 (Ethernet, USB, LCD, QEI, SD/MMC, comparator pins) and Table 5 (EMC pins).
Symbol
Pin LQFP208 Ball TFBGA208 Ball TFBGA180 Pin LQFP144 Pin LQFP100 Pin LQFP80 Pin TFBGA80 Reset state
[1]
Type
[2]
Description