Datasheet

xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx
LPC408X_7X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved. Product data sheet Rev. 3.1 — 1 September 2014 15 of 138 NXP Semiconductors
LPC408x/7x
32-bit ARM Cortex-M4 microcontroller
P0[10] 98 T15 L10 69 48 39 K9
[3]
I; PU I/O P0[10] — General purpose digital input/output pin.
O U2_TXD — Transmitter output for UART2.
I/O I2C2_SDA — I
2
C2 data input/output (this pin does not use
a specialized I2C pad).
O T3_MAT0 — Match output for Timer 3, channel 0.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
O LCD_VD[5] — LCD data.
P0[11] 100 R14 P12 70 49 40 K10
[3]
I; PU I/O P0[11] — General purpose digital input/output pin.
I U2_RXD — Receiver input for UART2.
I/O I2C2_SCL — I
2
C2 clock input/output (this pin does not
use a specialized I2C pad).
O T3_MAT1 — Match output for Timer 3, channel 1.
- R — Function reserved.
- R — Function reserved.
- R — Function reserved.
O LCD_VD[10] — LCD data.
P0[12] 41 R1 J4 29 - - -
[5]
I; PU I/O P0[12] — General purpose digital input/output pin.
O USB_PPWR2
— Port Power enable signal for USB port 2.
I/O SSP1_MISO — Master In Slave Out for SSP1.
I ADC0_IN[6] — A/D converter 0, input 6. When configured
as an ADC input, the digital function of the pin must be
disabled.
Table 3. Pin description
…continued
Not all functions are available on all parts. See Table 2 (Ethernet, USB, LCD, QEI, SD/MMC, comparator pins) and Table 5 (EMC pins).
Symbol
Pin LQFP208 Ball TFBGA208 Ball TFBGA180 Pin LQFP144 Pin LQFP100 Pin LQFP80 Pin TFBGA80 Reset state
[1]
Type
[2]
Description