Datasheet

xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx
LPC408X_7X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved. Product data sheet Rev. 3.1 — 1 September 2014 14 of 138 NXP Semiconductors
LPC408x/7x
32-bit ARM Cortex-M4 microcontroller
P0[8] 160 A15 C12 111 77 62 A10
[4]
I; IA I/O P0[8] — General purpose digital input/output pin.
I/O I2S_TX_WS — I
2
S Transmit word select. It is driven by the
master and received by the slave. Corresponds to the
signal WS in the I
2
S-bus specification.
I/O SSP1_MISO — Master In Slave Out for SSP1.
O T2_MAT2 — Match output for Timer 2, channel 2.
I RTC_EV1 — Event input 1 to Event Monitor/Recorder.
I CMP1_IN[3] — Comparator 1, input 3.
- R — Function reserved.
O LCD_VD[16] — LCD data.
P0[9] 158 C14 A13 109 76 61 A9
[4]
I; IA I/O P0[9] — General purpose digital input/output pin.
I/O I2S_TX_SDA — I
2
S transmit data. It is driven by the
transmitter and read by the receiver. Corresponds to the
signal SD in the I
2
S-bus specification.
I/O SSP1_MOSI — Master Out Slave In for SSP1.
O T2_MAT3 — Match output for Timer 2, channel 3.
I RTC_EV2 — Event input 2 to Event Monitor/Recorder.
I CMP1_IN[2] — Comparator 1, input 2.
- R — Function reserved.
O LCD_VD[17] — LCD data.
Table 3. Pin description
…continued
Not all functions are available on all parts. See Table 2 (Ethernet, USB, LCD, QEI, SD/MMC, comparator pins) and Table 5 (EMC pins).
Symbol
Pin LQFP208 Ball TFBGA208 Ball TFBGA180 Pin LQFP144 Pin LQFP100 Pin LQFP80 Pin TFBGA80 Reset state
[1]
Type
[2]
Description