Datasheet

LPC408X_7X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 3.1 — 1 September 2014 107 of 138
NXP Semiconductors
LPC408x/7x
32-bit ARM Cortex-M4 microcontroller
12.2 DAC electrical characteristics
12.3 Comparator electrical characteristics
The values of resistor components R
cmp
and R
sw
vary with temperature and input voltage and are
process-dependent.
Fig 33. ADC interface to pins ADC0_IN[n]
Table 29. ADC interface components
Component Range Description
R
cmp
90  to 300  Switch-on resistance for the comparator input switch. Varies
with temperature, input voltage, and process.
R
sw
500  to 2 k Switch-on resistance for channel selection switch. Varies with
temperature, input voltage, and process.
C1 110 fF Parasitic capacitance from the ADC block level.
C2 80 fF Parasitic capacitance from the ADC block level.
C3 1.6 pF Sampling capacitor.
LPC408x/7x
AD0[n]
110 fF
80 fF
C
ia
1.6 pF
R
vsi
R
sw
500 Ω - 2 kΩ
R
cmp
90 Ω - 300 Ω
V
SS
V
EXT
002aah275
ADC
COMPARATOR
BLOCK
C1
C3
C2
Table 30. 10-bit DAC electrical characteristics
V
DDA
= 2.7 V to 3.6 V; T
amb
=  40  C to +85  C unless otherwise specified
Symbol Parameter Min Typ Max Unit
E
D
differential linearity error - 1- LSB
E
L(adj)
integral non-linearity - 1.5 - LSB
E
O
offset error - 0.6 - %
E
G
gain error - 0.6 - %
C
L
load capacitance - - 200 pF
R
L
load resistance 1 - - k
Table 31. Comparator characteristics
V
DDA
= 3.0 V and T
amb
= 25  C unless noted otherwise.
Symbol Parameter Conditions Min Typ Max Unit
Static characteristics
I
DD
supply current - 55 - A
V
IC
common-mode input voltage 0 - V
DDA
V