Microcontrollers User manual

UM10237_2 © NXP B.V. 2008. All rights reserved.
User manual Rev. 02 — 19 December 2008 225 of 792
NXP Semiconductors
UM10237
Chapter 11: LPC24XX Ethernet
7.1.11 MII Mgmt Address Register (MADR - 0xFFE0 0028)
The MII Mgmt Address register (MADR) has an address of 0xFFE0 0028. The bit
definition of this register is shown in Table 11–199
.
7.1.12 MII Mgmt Write Data Register (MWTD - 0xFFE0 002C)
The MII Mgmt Write Data register (MWTD) is a Write Only register with an address of
0xFFE0 002C. The bit definition of this register is shown in Table 11–200
.
7.1.13 MII Mgmt Read Data Register (MRDD - 0xFFE0 0030)
The MII Mgmt Read Data register (MRDD) is a Read Only register with an address of
0xFFE0 0030. The bit definition of this register is shown in Table 11–201
.
7.1.14 MII Mgmt Indicators Register (MIND - 0xFFE0 0034)
The MII Mgmt Indicators register (MIND) is a Read Only register with an address of
0xFFE0 0034. The bit definition of this register is shown in Table 11–202
.
Table 198. MII Mgmt Command register (MCMD - address 0xFFE0 0024) bit description
Bit Symbol Function Reset
value
0 READ This bit causes the MII Management hardware to perform a single Read cycle. The Read data is
returned in Register MRDD (MII Mgmt Read Data).
0
1 SCAN This bit causes the MII Management hardware to perform Read cycles continuously. This is
useful for monitoring Link Fail for example.
0
31:2 - Unused 0x0
Table 199. MII Mgmt Address register (MADR - address 0xFFE0 0028) bit description
Bit Symbol Function Reset
value
4:0 REGISTER
ADDRESS
This field represents the 5 bit Register Address field of Mgmt
cycles. Up to 32 registers can be accessed.
0x0
7:5 - Unused 0x0
12:8 PHY ADDRESS This field represents the 5 bit PHY Address field of Mgmt
cycles. Up to 31 PHYs can be addressed (0 is reserved).
0x0
31:13 - Unused 0x0
Table 200. MII Mgmt Write Data register (MWTD - address 0xFFE0 002C) bit description
Bit Symbol Function Reset
value
15:0 WRITE
DATA
When written, an MII Mgmt write cycle is performed using the 16 bit
data and the pre-configured PHY and Register addresses from the
MII Mgmt Address register (MADR).
0x0
31:16 - Unused 0x0
Table 201. MII Mgmt Read Data register (MRDD - address 0xFFE0 0030) bit description
Bit Symbol Function Reset
value
15:0 READ
DATA
Following an MII Mgmt Read Cycle, the 16 bit data can be read from
this location.
0x0
31:16 - Unused 0x0