Microcontrollers User manual

UM10237_2 © NXP B.V. 2008. All rights reserved.
User manual Rev. 02 — 19 December 2008 175 of 792
NXP Semiconductors
UM10237
Chapter 8: LPC24XX Pin configuration
the address mirror bit is set in the EMCControl register during POR, see Table 5–68.
Therefore, the user code residing in the external boot memory must be linked to execute
from address location 0x8000 0000 (EMC bank 0 address).
Remark: The external boot option is supported only for flashless devices LPC2460 and
LPC2470.