Datasheet

LPC1315_16_17_45_46_47 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 3 — 20 September 2012 38 of 77
NXP Semiconductors
LPC1315/16/17/45/46/47
32-bit ARM Cortex-M3 microcontroller
8. Limiting values
[1] The following applies to the limiting values:
a) This product includes circuitry specifically designed for the protection of its internal devices from the damaging effects of excessive
static charge. Nonetheless, it is suggested that conventional precautions be taken to avoid applying greater than the rated
maximum.
b) Parameters are valid over operating temperature range unless otherwise specified. All voltages are with respect to V
SS
unless
otherwise noted.
[2] Including voltage on outputs in 3-state mode.
[3] The maximum non-operating storage temperature is different than the temperature for required shelf life which should be determined
based on required shelf lifetime. Please refer to the JEDEC spec (J-STD-033B.1) for further details.
[4] Human body model: equivalent to discharging a 100 pF capacitor through a 1.5 k series resistor.
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
[1]
Symbol Parameter Conditions Min Max Unit
V
DD
supply voltage (core and
external rail)
2.0 3.6 V
V
I
input voltage 5 V tolerant I/O pins; only valid
when the V
DD
supply voltage is
present
[2]
0.5 +5.5 V
I
DD
supply current per supply pin - 100 mA
I
SS
ground current per ground pin - 100 mA
I
latch
I/O latch-up current (0.5V
DD
) < V
I
< (1.5V
DD
);
T
j
< 125 C
-100mA
T
stg
storage temperature non-operating
[3]
65 +150 C
T
j(max)
maximum junction temperature - 150 C
P
tot(pack)
total power dissipation (per
package)
based on package heat transfer, not
device power consumption
-1.5W
V
ESD
electrostatic discharge voltage human body model; all pins
[4]
5000 +5000 V