Datasheet

LPC1311_13_42_43 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 5 — 6 June 2012 42 of 74
NXP Semiconductors
LPC1311/13/42/43
32-bit ARM Cortex-M3 microcontroller
9.4 Power consumption for LPC1300L series (LPC1311/01 and
LPC1313/01)
Remark: Applies to parts LPC1311/01 and LPC1313/01 and all their packages.
Power measurements in Active, Sleep, and Deep-sleep modes were performed under the
following conditions (see LPC13xx user manual):
• Configure all pins as GPIO with pull-up resistor disabled in the IOCONFIG block.
• Configure GPIO pins as outputs using the GPIOnDIR registers.
• Write 0 to all GPIOnDATA registers to drive the outputs LOW.
Fig 13. Typical supply current versus temperature in Deep power-down mode
(LPC1311/13/42/43)
002aae996
0.4
0.6
1.2
I
DD
(μA)
0
temperature (°C)
−40 853510 60−15
VDD = 3.6 V
3.3 V
2.0 V