Datasheet
LPC11U3X All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 2.2 — 11 March 2014  76 of 77
continued >>
NXP Semiconductors
LPC11U3x
32-bit ARM Cortex-M0 microcontroller
19. Contents
1  General description . . . . . . . . . . . . . . . . . . . . . .  1
2  Features and benefits . . . . . . . . . . . . . . . . . . . .  1
3  Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3
4  Ordering information. . . . . . . . . . . . . . . . . . . . .  3
4.1  Ordering options. . . . . . . . . . . . . . . . . . . . . . . .  4
5  Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . .  5
6  Pinning information. . . . . . . . . . . . . . . . . . . . . .  6
6.1  Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
6.2  Pin description . . . . . . . . . . . . . . . . . . . . . . . .  10
7  Functional description  . . . . . . . . . . . . . . . . . .  17
7.1  On-chip flash programming memory  . . . . . . .  17
7.2  EEPROM . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17
7.3  SRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17
7.4  On-chip ROM . . . . . . . . . . . . . . . . . . . . . . . . .  17
7.5  Memory map. . . . . . . . . . . . . . . . . . . . . . . . . .  17
7.6  Nested Vectored Interrupt Controller 
(NVIC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18
7.6.1  Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18
7.6.2  Interrupt sources. . . . . . . . . . . . . . . . . . . . . . .  19
7.7  IOCON block  . . . . . . . . . . . . . . . . . . . . . . . . .  19
7.7.1  Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19
7.8  General-Purpose Input/Output GPIO . . . . . . .  19
7.8.1  Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  20
7.9  USB interface . . . . . . . . . . . . . . . . . . . . . . . .  20
7.9.1  Full-speed USB device controller . . . . . . . . . .  20
7.9.1.1  Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  20
7.10 I/O Handler 
(LPC11U37HFBD64/401 only) . . . . . . . . . . . .  20
7.11  USART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21
7.11.1  Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21
7.12  SSP serial I/O controller . . . . . . . . . . . . . . . . .  21
7.12.1  Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  21
7.13 I
2
C-bus serial I/O controller  . . . . . . . . . . . . . .  22
7.13.1  Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  22
7.14  10-bit ADC  . . . . . . . . . . . . . . . . . . . . . . . . . . .  22
7.14.1  Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  22
7.15  General purpose external event 
counter/timers. . . . . . . . . . . . . . . . . . . . . . . . .  23
7.15.1  Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23
7.16  System tick timer  . . . . . . . . . . . . . . . . . . . . . .  23
7.17 Windowed WatchDog Timer 
(WWDT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23
7.17.1  Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  23
7.18  Clocking and power control  . . . . . . . . . . . . . .  24
7.18.1  Integrated oscillators . . . . . . . . . . . . . . . . . . .  24
7.18.1.1  Internal RC oscillator  . . . . . . . . . . . . . . . . . . .  25
7.18.1.2  System oscillator . . . . . . . . . . . . . . . . . . . . . .  26
7.18.1.3  Watchdog oscillator . . . . . . . . . . . . . . . . . . . . 26
7.18.2  System PLL and USB PLL. . . . . . . . . . . . . . .   26
7.18.3  Clock output. . . . . . . . . . . . . . . . . . . . . . . . . .   26
7.18.4  Wake-up process . . . . . . . . . . . . . . . . . . . . . .   26
7.18.5  Power control. . . . . . . . . . . . . . . . . . . . . . . . .   26
7.18.5.1  Power profiles  . . . . . . . . . . . . . . . . . . . . . . . .   27
7.18.5.2  Sleep mode . . . . . . . . . . . . . . . . . . . . . . . . . .   27
7.18.5.3  Deep-sleep mode. . . . . . . . . . . . . . . . . . . . . .   27
7.18.5.4  Power-down mode. . . . . . . . . . . . . . . . . . . . .   27
7.18.5.5  Deep power-down mode . . . . . . . . . . . . . . . .   28
7.18.6  System control . . . . . . . . . . . . . . . . . . . . . . . .   28
7.18.6.1  Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   28
7.18.6.2  Brownout detection  . . . . . . . . . . . . . . . . . . . .   28
7.18.6.3 Code security
(Code Read Protection - CRP) . . . . . . . . . . .   28
7.18.6.4  APB interface. . . . . . . . . . . . . . . . . . . . . . . . .   29
7.18.6.5  AHBLite . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   29
7.18.6.6 External interrupt inputs. . . . . . . . . . . . . . . . .   29
7.19  Emulation and debugging  . . . . . . . . . . . . . . .   30
8  Limiting values . . . . . . . . . . . . . . . . . . . . . . . . 31
9  Static characteristics  . . . . . . . . . . . . . . . . . . .   32
9.1  BOD static characteristics . . . . . . . . . . . . . . .   38
9.2  Power consumption . . . . . . . . . . . . . . . . . . .   38
9.3  Peripheral power consumption . . . . . . . . . . .   41
9.4  Electrical pin characteristics. . . . . . . . . . . . . .   43
10  Dynamic characteristics. . . . . . . . . . . . . . . . .   46
10.1  Flash memory  . . . . . . . . . . . . . . . . . . . . . . . . 46
10.2  External clock. . . . . . . . . . . . . . . . . . . . . . . . . 46
10.3  Internal oscillators  . . . . . . . . . . . . . . . . . . . . .   47
10.4  I/O pins  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   48
10.5 I
2
C-bus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
10.6  SSP interface . . . . . . . . . . . . . . . . . . . . . . . . .   50
10.7  USB interface  . . . . . . . . . . . . . . . . . . . . . . . .   53
11  Application information . . . . . . . . . . . . . . . . .   54
11.1  Suggested USB interface solutions . . . . . . . .   54
11.2  XTAL input . . . . . . . . . . . . . . . . . . . . . . . . . . .   56
11.3  XTAL Printed-Circuit Board 
(PCB) layout guidelines . . . . . . . . . . . . . . . . .   57
11.4  Standard I/O pad configuration  . . . . . . . . . . .   58
11.5  Reset pad configuration. . . . . . . . . . . . . . . . .   59
11.6  ADC effective input impedance . . . . . . . . . . .   59
11.7  ADC usage notes. . . . . . . . . . . . . . . . . . . . . .   60
11.8  I/O Handler software library applications . . . .   60
11.8.1  I/O Handler I
2
S. . . . . . . . . . . . . . . . . . . . . . . . 60
11.8.2  I/O Handler UART . . . . . . . . . . . . . . . . . . . . .   60
11.8.3  I/O Handler I
2
C. . . . . . . . . . . . . . . . . . . . . . . .   61
11.8.4  I/O Handler DMA . . . . . . . . . . . . . . . . . . . . . .   61










